Getting Started 

Explore wireless design examples, articles, and tutorials.

Massive MIMO and Beamforming

This example introduces the basic concept of hybrid beamforming and shows how to simulate such a system.

Channel Modeling and RF Propogation

Construct a 5G urban macro-cell test environment and visualize the signal-to-interference-plus-noise ratio (SINR) on a map. The test environment is based on the guidelines defined in Report ITU-R M.[IMT-2020.EVAL] for evaluating 5G radio technologies.

RF Front End

This example shows how to programmatically perform an RF budget analysis of an RF receiver system and visualize computed budget results across the bandwidth of the input signal.

Antenna Modeling and Design

This example shows how to visualize the far fields for antennas and antenna arrays. The example explains different options available in the pattern function.

5G and LTE Mobile Communications Standards

This example shows how to generate LTE-Advanced Pro Release 13 Narrowband IoT (NB-IoT) waveforms for test and measurement applications

WLAN and Connectivity Standards

This example shows the transmit and receive processing for an IEEE® 802.11ax™ multi-user downlink transmission over a TGax indoor fading channel.

Software-Defined Radio

This example shows how to use the Xilinx® Zynq-based radio support package with MATLAB and LTE Toolbox to generate an LTE transmission.

Hardware Design and Verification

This example shows how to build an LTE compliant OFDM modulator and detector for implementation.