HC-SR04 library listArduinoLibraries is not showing it.

HI i have copied HC-SR04 library to default folder i.e arduino\libraries\ yet listArduinoLibraries is not showing it. please advise actions

[Nicolas Schmit]

Verify that you added arduino\libraries\ to the MATLAB path.

[ahmed arsalan]

yes i have added

Answer 1

[Madhu Govindarajan]

Have you tried using this? - https://www.mathworks.com/matlabcentral/fileexchange/57898-hc-sr04-add-on-library-for-arduino

Please follow all the instructions provided in that order -

Important: Before using this add-on library in MATLAB, you need to install the Ultrasonic Arduino library. Here are the instructions: 1. Download the zip file from https://github.com/JRodrigoTech/Ultrasonic-HC-SR04/archive/master.zip 2. Unpackage the zip into local directory and rename the folder to ‘Ultrasonic’. 3. Move the ‘Ultrasonic’ folder into the "libraries" folder inside your Arduino sketchbook folder: On Windows, the default path is "Documents\Arduino\libraries\" On Mac, the default path is "~/Documents/Arduino/libraries/" On Linux, the default path is "/home/<username>/Arduino/libraries"

[ahmed arsalan]

yes... tried the same as explained at the site.. not working at all

[Kevin Gilliam]

Did you ever figure this out? I'm having the same problem...

[ahmed arsalan]

no not at all!!! I just shifted to labview

Answer 2

[vladimir so]

query

They could explain where exactly this file should be copied.

I have copied everywhere but when writing: listArduinoLibraries in matlab I only get it: 'Adafruit / MotorShieldV2'      'I2C'      'SPI'      'Servo'

[Madhu Govindarajan]

Have you tried the commands provided in this answer ? If not, please try it with your library name - I would guess some version that involves 'JRodrigoTech/HCSR04' should fix the issue.

Answer 3

[Thulasiram Reddy]

iam using matlab 2016a version and i installed arduino matlab support packages

Description:

i want to interface ultrasonicsensor with matlab but the addon is not showing in matlab after that i seted path i given command "listArduinoLibraries" it showing

'Adafruit/MotorShieldV2'

'I2C'

'JRodrigoTech/HCSR04'

'SPI'

'Servo

afer that i again given command a = arduino('COM6', 'Uno', 'Libraries', 'JRodrigoTech/HCSR04')

Updating server code on board Uno (COM6). Please wait.

Cannot program board Uno (COM6). Please make sure the board is supported and the port and board type are correct.

?????????????whycoming like this...

[Madhu Govindarajan]

Have you tried putting the board into bootloader mode by double pressing the Reset button?