How can I plot the graph with the highest, lowest and middle values?
3 views (last 30 days)
Show older comments
num_simulations = 10000;
%Common parameters
Discount_Rate_min = 0.06; % assume 6-8%
Discount_Rate_max = 0.08;
Discount_Rate_values = unifrnd(Discount_Rate_min, Discount_Rate_max, [num_simulations, 1]);
Lifetime = 20; % years
Electricity_Cost_mean = 0.255; %EUR/kWh
Electricity_Cost_std = 0.04;
Electricity_Cost_values = normrnd(Electricity_Cost_mean, Electricity_Cost_std, [num_simulations,1]);
Electricity_Cost_values(Electricity_Cost_values < 0.02) = 0.02;
Electricity_Cost_values(Electricity_Cost_values > 0.9) = 0.9;
% Define the 3-sigma range
lower_E = Electricity_Cost_mean - 3 * Electricity_Cost_std;
upper_E = Electricity_Cost_mean + 3 * Electricity_Cost_std;
mean_E = Electricity_Cost_mean;
FLH_min = 1000;
FLH_max = 8760;
FLH = unifrnd(FLH_min, FLH_max, [num_simulations, 1]);
LHV = 33.33; %kWh/kgH2
%SOEC parameters
CAPEX_System_SOEC_mean = 4200; %$/kW
CAPEX_System_SOEC_std = 500;
CAPEX_System_SOEC_values = normrnd(CAPEX_System_SOEC_mean, CAPEX_System_SOEC_std, [num_simulations,1]);
CAPEX_System_SOEC_values(CAPEX_System_SOEC_values < 2800) = 2800;
CAPEX_System_SOEC_values(CAPEX_System_SOEC_values > 5600) = 5600;
CAPEX_Stack_SOEC_values = 0.5*CAPEX_System_SOEC_values; % 50% of CAPEX system
CAPEX_SOEC_values = (CAPEX_System_SOEC_values + CAPEX_Stack_SOEC_values);
OPEX_SOEC_values = 3; % 3% of CAPEX/a
System_Efficiency_SOEC_mean = 0.775;
System_Efficiency_SOEC_std = 0.05;
System_Efficiency_SOEC_values = normrnd(System_Efficiency_SOEC_mean, System_Efficiency_SOEC_std, [num_simulations,1]);
System_Efficiency_SOEC_values(System_Efficiency_SOEC_values < 0.74) = 0.74;
System_Efficiency_SOEC_values(System_Efficiency_SOEC_values > 0.81) = 0.81;
%PEM parameters
CAPEX_System_PEM_mean = 1450; %$/kW
CAPEX_System_PEM_std = 50;
CAPEX_System_PEM_values = normrnd(CAPEX_System_PEM_mean, CAPEX_System_PEM_std, [num_simulations,1]);
CAPEX_System_PEM_values(CAPEX_System_PEM_values < 1100) = 1100;
CAPEX_System_PEM_values(CAPEX_System_PEM_values > 1800) = 1800;
CAPEX_Stack_PEM_values = 0.35*CAPEX_System_PEM_values; % 35% of CAPEX system
CAPEX_PEM_values = (CAPEX_System_PEM_values + CAPEX_Stack_PEM_values);
OPEX_PEM_values = 3;
System_Efficiency_PEM_mean = 0.58;
System_Efficiency_PEM_std = 0.01;
System_Efficiency_PEM_values = normrnd(System_Efficiency_PEM_mean, System_Efficiency_PEM_std, [num_simulations,1]);
System_Efficiency_PEM_values(System_Efficiency_PEM_values < 0.56) = 0.56;
System_Efficiency_PEM_values(System_Efficiency_PEM_values > 0.6) = 0.6;
%AEC parameters
CAPEX_System_AEC_mean = 950; % $/kW
CAPEX_System_AEC_std = 50;
CAPEX_System_AEC_values = normrnd(CAPEX_System_AEC_mean, CAPEX_System_AEC_std, [num_simulations,1]);
CAPEX_System_AEC_values(CAPEX_System_AEC_values < 500) = 500;
CAPEX_System_AEC_values(CAPEX_System_AEC_values > 1400) = 1400;
CAPEX_Stack_AEC_values = 0.35*CAPEX_System_AEC_values; % 35% of CAPEX system
CAPEX_AEC_values = (CAPEX_System_AEC_values + CAPEX_Stack_AEC_values);
OPEX_AEC_values = 3;
System_Efficiency_AEC_mean = 0.665;
System_Efficiency_AEC_std = 0.05;
System_Efficiency_AEC_values = normrnd(System_Efficiency_AEC_mean, System_Efficiency_AEC_std, [num_simulations,1]);
System_Efficiency_AEC_values(System_Efficiency_AEC_values < 0.63) = 0.63;
System_Efficiency_AEC_values(System_Efficiency_AEC_values > 0.7) = 0.7;
% Calculate SOEC LCOH values
term1_S = LHV ./ (System_Efficiency_SOEC_values);
term2_S = Discount_Rate_values .* (1 + Discount_Rate_values).^Lifetime;
term3_S = (OPEX_SOEC_values / 100);
term4_S = CAPEX_SOEC_values ./ FLH;
Lower_LCOH_SOEC = term1_S .* ((term2_S ./ ((1 + Discount_Rate_values).^Lifetime - 1) + term3_S) .* term4_S + lower_E);
Upper_LCOH_SOEC = term1_S .* ((term2_S ./ ((1 + Discount_Rate_values).^Lifetime - 1) + term3_S) .* term4_S + upper_E);
Mean_LCOH_SOEC = term1_S .* ((term2_S ./ ((1 + Discount_Rate_values).^Lifetime - 1) + term3_S) .* term4_S + mean_E);
% Calculate PEM LCOH values
term1_P = LHV ./ (System_Efficiency_PEM_values);
term2_P = Discount_Rate_values .* (1 + Discount_Rate_values).^Lifetime;
term3_P = (OPEX_PEM_values / 100);
term4_P = CAPEX_PEM_values ./ FLH;
Lower_LCOH_PEM = term1_P .* ((term2_P ./ ((1 + Discount_Rate_values).^Lifetime - 1) + term3_P) .* term4_P + lower_E);
Upper_LCOH_PEM = term1_P .* ((term2_P ./ ((1 + Discount_Rate_values).^Lifetime - 1) + term3_P) .* term4_P + upper_E);
Mean_LCOH_PEM = term1_P .* ((term2_P ./ ((1 + Discount_Rate_values).^Lifetime - 1) + term3_P) .* term4_P + mean_E);
% Calculate AEC LCOH values
term1_A = LHV ./ (System_Efficiency_AEC_values);
term2_A = Discount_Rate_values .* (1 + Discount_Rate_values).^Lifetime;
term3_A = (OPEX_AEC_values / 100);
term4_A = CAPEX_AEC_values ./ FLH;
Lower_LCOH_AEC = term1_A .* ((term2_A ./ ((1 + Discount_Rate_values).^Lifetime - 1) + term3_A) .* term4_A + lower_E);
Upper_LCOH_AEC = term1_A .* ((term2_A ./ ((1 + Discount_Rate_values).^Lifetime - 1) + term3_A) .* term4_A + upper_E);
Mean_LCOH_AEC = term1_A .* ((term2_A ./ ((1 + Discount_Rate_values).^Lifetime - 1) + term3_A) .* term4_A + mean_E);
% Calculate average values for mean LCOH
Avg_Lower_LCOH_SOEC = mean(Lower_LCOH_SOEC, 2);
Avg_Upper_LCOH_SOEC = mean(Upper_LCOH_SOEC, 2);
Avg_Mean_LCOH_SOEC = mean(Mean_LCOH_SOEC, 2);
Avg_Lower_LCOH_PEM = mean(Lower_LCOH_PEM, 2);
Avg_Upper_LCOH_PEM = mean(Upper_LCOH_PEM, 2);
Avg_Mean_LCOH_PEM = mean(Mean_LCOH_PEM, 2);
Avg_Lower_LCOH_AEC = mean(Lower_LCOH_AEC, 2);
Avg_Upper_LCOH_AEC = mean(Upper_LCOH_AEC, 2);
Avg_Mean_LCOH_AEC = mean(Mean_LCOH_AEC, 2);
% Plot the graph for lower, upper, and mean LCOH of SOEC, PEM, and AEC
figure;
% Plot SOEC
plot(FLH, Lower_LCOH_SOEC, 'b-', 'LineWidth', 1.5);
hold on;
plot(FLH, Upper_LCOH_SOEC, 'b-', 'LineWidth', 1.5);
plot(FLH, Mean_LCOH_SOEC, 'b--', 'LineWidth', 1.5);
% Plot PEM
plot(FLH, Lower_LCOH_PEM, 'g-', 'LineWidth', 1.5);
plot(FLH, Upper_LCOH_PEM, 'g-', 'LineWidth', 1.5);
plot(FLH, Mean_LCOH_PEM, 'g--', 'LineWidth', 1.5);
% Plot AEC
plot(FLH, Lower_LCOH_AEC, 'm-', 'LineWidth', 1.5);
plot(FLH, Upper_LCOH_AEC, 'm-', 'LineWidth', 1.5);
plot(FLH, Mean_LCOH_AEC, 'm--', 'LineWidth', 1.5);
xlabel('FLH');
ylabel('LCOH');
title('LCOH vs FLH for SOEC, PEM, and AEC');
legend('Lower SOEC', 'Upper SOEC', 'Mean SOEC', 'Lower PEM', 'Upper PEM', 'Mean PEM', 'Lower AEC', 'Upper AEC', 'Mean AEC');
grid on;
hold off;
This result is below;
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1583241/image.png)
How can I plot the line graph with the highest value of Upper, the lowest value of Lower, and mean value of Mean?
Image is like this;
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1583246/image.png)
Answers (3)
Torsten
on 5 Jan 2024
Add the lines
[FLH,I] = sort(FLH);
Lower_LCOH_SOEC = Lower_LCOH_SOEC(I);
Upper_LCOH_SOEC = Upper_LCOH_SOEC(I);
Mean_LCOH_SOEC = Mean_LCOH_SOEC(I);
Lower_LCOH_PEM = Lower_LCOH_PEM(I);
Upper_LCOH_PEM = Upper_LCOH_PEM(I);
Mean_LCOH_PEM = Mean_LCOH_PEM(I);
Lower_LCOH_AEC = Lower_LCOH_AEC(I);
Upper_LCOH_AEC = Upper_LCOH_AEC(I);
Mean_LCOH_AEC = Mean_LCOH_AEC(I);
for that FLH is ordered.
But I doubt that the data for the curves in the image were obtained in the same way as your Lower/Upper/Mean arrays.
Aquatris
on 5 Jan 2024
Edited: Aquatris
on 5 Jan 2024
do you know of functions min(), max() and mean()? Example
% generate random data
t = (0:0.01:10)';
x = exp(-.2*t).*(2+(2*rand(length(t),5)-1)*0.01); % n x 5 data set
plot(t,x,'g',t,min(x,[],2),'r--',t,max(x,[],2),'b--',t,mean(x,2),'m--')
xlim([2 2.5])
0 Comments
Torsten
on 5 Jan 2024
Edited: Torsten
on 5 Jan 2024
Yes, I corrected one mistake in your code, but I also wrote that I don't think that the curves in the image were produced the way you try to do it.
What are the curves in the image ? Probability density functions ?
I tried "movmean" and "cumtrapz" to average your values.
num_simulations = 1000000;
%Common parameters
Discount_Rate_min = 0.06; % assume 6-8%
Discount_Rate_max = 0.08;
Discount_Rate_values = unifrnd(Discount_Rate_min, Discount_Rate_max, [num_simulations, 1]);
Lifetime = 20; % years
Electricity_Cost_mean = 0.255; %EUR/kWh
Electricity_Cost_std = 0.04;
Electricity_Cost_values = normrnd(Electricity_Cost_mean, Electricity_Cost_std, [num_simulations,1]);
Electricity_Cost_values(Electricity_Cost_values < 0.02) = 0.02;
Electricity_Cost_values(Electricity_Cost_values > 0.9) = 0.9;
% Define the 3-sigma range
lower_E = Electricity_Cost_mean - 3 * Electricity_Cost_std;
upper_E = Electricity_Cost_mean + 3 * Electricity_Cost_std;
mean_E = Electricity_Cost_mean;
FLH_min = 1000;
FLH_max = 8760;
FLH = unifrnd(FLH_min, FLH_max, [num_simulations, 1]);
LHV = 33.33; %kWh/kgH2
%SOEC parameters
CAPEX_System_SOEC_mean = 4200; %$/kW
CAPEX_System_SOEC_std = 500;
CAPEX_System_SOEC_values = normrnd(CAPEX_System_SOEC_mean, CAPEX_System_SOEC_std, [num_simulations,1]);
CAPEX_System_SOEC_values(CAPEX_System_SOEC_values < 2800) = 2800;
CAPEX_System_SOEC_values(CAPEX_System_SOEC_values > 5600) = 5600;
CAPEX_Stack_SOEC_values = 0.5*CAPEX_System_SOEC_values; % 50% of CAPEX system
CAPEX_SOEC_values = (CAPEX_System_SOEC_values + CAPEX_Stack_SOEC_values);
OPEX_SOEC_values = 3; % 3% of CAPEX/a
System_Efficiency_SOEC_mean = 0.775;
System_Efficiency_SOEC_std = 0.05;
System_Efficiency_SOEC_values = normrnd(System_Efficiency_SOEC_mean, System_Efficiency_SOEC_std, [num_simulations,1]);
System_Efficiency_SOEC_values(System_Efficiency_SOEC_values < 0.74) = 0.74;
System_Efficiency_SOEC_values(System_Efficiency_SOEC_values > 0.81) = 0.81;
%PEM parameters
CAPEX_System_PEM_mean = 1450; %$/kW
CAPEX_System_PEM_std = 50;
CAPEX_System_PEM_values = normrnd(CAPEX_System_PEM_mean, CAPEX_System_PEM_std, [num_simulations,1]);
CAPEX_System_PEM_values(CAPEX_System_PEM_values < 1100) = 1100;
CAPEX_System_PEM_values(CAPEX_System_PEM_values > 1800) = 1800;
CAPEX_Stack_PEM_values = 0.35*CAPEX_System_PEM_values; % 35% of CAPEX system
CAPEX_PEM_values = (CAPEX_System_PEM_values + CAPEX_Stack_PEM_values);
OPEX_PEM_values = 3;
System_Efficiency_PEM_mean = 0.58;
System_Efficiency_PEM_std = 0.01;
System_Efficiency_PEM_values = normrnd(System_Efficiency_PEM_mean, System_Efficiency_PEM_std, [num_simulations,1]);
System_Efficiency_PEM_values(System_Efficiency_PEM_values < 0.56) = 0.56;
System_Efficiency_PEM_values(System_Efficiency_PEM_values > 0.6) = 0.6;
%AEC parameters
CAPEX_System_AEC_mean = 950; % $/kW
CAPEX_System_AEC_std = 50;
CAPEX_System_AEC_values = normrnd(CAPEX_System_AEC_mean, CAPEX_System_AEC_std, [num_simulations,1]);
CAPEX_System_AEC_values(CAPEX_System_AEC_values < 500) = 500;
CAPEX_System_AEC_values(CAPEX_System_AEC_values > 1400) = 1400;
CAPEX_Stack_AEC_values = 0.35*CAPEX_System_AEC_values; % 35% of CAPEX system
CAPEX_AEC_values = (CAPEX_System_AEC_values + CAPEX_Stack_AEC_values);
OPEX_AEC_values = 3;
System_Efficiency_AEC_mean = 0.665;
System_Efficiency_AEC_std = 0.05;
System_Efficiency_AEC_values = normrnd(System_Efficiency_AEC_mean, System_Efficiency_AEC_std, [num_simulations,1]);
System_Efficiency_AEC_values(System_Efficiency_AEC_values < 0.63) = 0.63;
System_Efficiency_AEC_values(System_Efficiency_AEC_values > 0.7) = 0.7;
% Calculate SOEC LCOH values
term1_S = LHV ./ (System_Efficiency_SOEC_values);
term2_S = Discount_Rate_values .* (1 + Discount_Rate_values).^Lifetime;
term3_S = (OPEX_SOEC_values / 100);
term4_S = CAPEX_SOEC_values ./ FLH;
Lower_LCOH_SOEC = term1_S .* ((term2_S ./ ((1 + Discount_Rate_values).^Lifetime - 1) + term3_S) .* term4_S + lower_E);
Upper_LCOH_SOEC = term1_S .* ((term2_S ./ ((1 + Discount_Rate_values).^Lifetime - 1) + term3_S) .* term4_S + upper_E);
Mean_LCOH_SOEC = term1_S .* ((term2_S ./ ((1 + Discount_Rate_values).^Lifetime - 1) + term3_S) .* term4_S + mean_E);
% Calculate PEM LCOH values
term1_P = LHV ./ (System_Efficiency_PEM_values);
term2_P = Discount_Rate_values .* (1 + Discount_Rate_values).^Lifetime;
term3_P = (OPEX_PEM_values / 100);
term4_P = CAPEX_PEM_values ./ FLH;
Lower_LCOH_PEM = term1_P .* ((term2_P ./ ((1 + Discount_Rate_values).^Lifetime - 1) + term3_P) .* term4_P + lower_E);
Upper_LCOH_PEM = term1_P .* ((term2_P ./ ((1 + Discount_Rate_values).^Lifetime - 1) + term3_P) .* term4_P + upper_E);
Mean_LCOH_PEM = term1_P .* ((term2_P ./ ((1 + Discount_Rate_values).^Lifetime - 1) + term3_P) .* term4_P + mean_E);
% Calculate AEC LCOH values
term1_A = LHV ./ (System_Efficiency_AEC_values);
term2_A = Discount_Rate_values .* (1 + Discount_Rate_values).^Lifetime;
term3_A = (OPEX_AEC_values / 100);
term4_A = CAPEX_AEC_values ./ FLH;
Lower_LCOH_AEC = term1_A .* ((term2_A ./ ((1 + Discount_Rate_values).^Lifetime - 1) + term3_A) .* term4_A + lower_E);
Upper_LCOH_AEC = term1_A .* ((term2_A ./ ((1 + Discount_Rate_values).^Lifetime - 1) + term3_A) .* term4_A + upper_E);
Mean_LCOH_AEC = term1_A .* ((term2_A ./ ((1 + Discount_Rate_values).^Lifetime - 1) + term3_A) .* term4_A + mean_E);
% Calculate average values for mean LCOH
Avg_Lower_LCOH_SOEC = mean(Lower_LCOH_SOEC, 2);
Avg_Upper_LCOH_SOEC = mean(Upper_LCOH_SOEC, 2);
Avg_Mean_LCOH_SOEC = mean(Mean_LCOH_SOEC, 2);
Avg_Lower_LCOH_PEM = mean(Lower_LCOH_PEM, 2);
Avg_Upper_LCOH_PEM = mean(Upper_LCOH_PEM, 2);
Avg_Mean_LCOH_PEM = mean(Mean_LCOH_PEM, 2);
Avg_Lower_LCOH_AEC = mean(Lower_LCOH_AEC, 2);
Avg_Upper_LCOH_AEC = mean(Upper_LCOH_AEC, 2);
Avg_Mean_LCOH_AEC = mean(Mean_LCOH_AEC, 2);
[FLH,I] = sort(FLH);
Lower_LCOH_SOEC = Lower_LCOH_SOEC(I);
Upper_LCOH_SOEC = Upper_LCOH_SOEC(I);
Mean_LCOH_SOEC = Mean_LCOH_SOEC(I);
Lower_LCOH_PEM = Lower_LCOH_PEM(I);
Upper_LCOH_PEM = Upper_LCOH_PEM(I);
Mean_LCOH_PEM = Mean_LCOH_PEM(I);
Lower_LCOH_AEC = Lower_LCOH_AEC(I);
Upper_LCOH_AEC = Upper_LCOH_AEC(I);
Mean_LCOH_AEC = Mean_LCOH_AEC(I);
Lower_LCOH_SOEC_ct = cumtrapz(FLH,Lower_LCOH_SOEC)./(FLH-FLH(1));
Upper_LCOH_SOEC_ct = cumtrapz(FLH,Upper_LCOH_SOEC)./(FLH-FLH(1));
Mean_LCOH_SOEC_ct = cumtrapz(FLH,Mean_LCOH_SOEC)./(FLH-FLH(1));
Lower_LCOH_PEM_ct = cumtrapz(FLH,Lower_LCOH_PEM)./(FLH-FLH(1));
Upper_LCOH_PEM_ct = cumtrapz(FLH,Upper_LCOH_PEM)./(FLH-FLH(1));
Mean_LCOH_PEM_ct = cumtrapz(FLH,Mean_LCOH_PEM)./(FLH-FLH(1));
Lower_LCOH_AEC_ct = cumtrapz(FLH,Lower_LCOH_AEC)./(FLH-FLH(1));
Upper_LCOH_AEC_ct = cumtrapz(FLH,Upper_LCOH_AEC)./(FLH-FLH(1));
Mean_LCOH_AEC_ct = cumtrapz(FLH,Mean_LCOH_AEC)./(FLH-FLH(1));
N = 100;
Lower_LCOH_SOEC_mm = movmean(Lower_LCOH_SOEC,N);
Upper_LCOH_SOEC_mm = movmean(Upper_LCOH_SOEC,N);
Mean_LCOH_SOEC_mm = movmean(Mean_LCOH_SOEC,N);
Lower_LCOH_PEM_mm = movmean(Lower_LCOH_PEM,N);
Upper_LCOH_PEM_mm = movmean(Upper_LCOH_PEM,N);
Mean_LCOH_PEM_mm = movmean(Mean_LCOH_PEM,N);
Lower_LCOH_AEC_mm = movmean(Lower_LCOH_AEC,N);
Upper_LCOH_AEC_mm = movmean(Upper_LCOH_AEC,N);
Mean_LCOH_AEC_mm = movmean(Mean_LCOH_AEC,N);
% Plot the graph for lower, upper, and mean LCOH of SOEC, PEM, and AEC
figure(1);
% Plot SOEC
plot(FLH, Lower_LCOH_SOEC_ct, 'b-', 'LineWidth', 1.5);
hold on;
plot(FLH, Upper_LCOH_SOEC_ct, 'b-', 'LineWidth', 1.5);
plot(FLH, Mean_LCOH_SOEC_ct, 'b--', 'LineWidth', 1.5);
% Plot PEM
plot(FLH, Lower_LCOH_PEM_ct, 'g-', 'LineWidth', 1.5);
plot(FLH, Upper_LCOH_PEM_ct, 'g-', 'LineWidth', 1.5);
plot(FLH, Mean_LCOH_PEM_ct, 'g--', 'LineWidth', 1.5);
% Plot AEC
plot(FLH, Lower_LCOH_AEC_ct, 'm-', 'LineWidth', 1.5);
plot(FLH, Upper_LCOH_AEC_ct, 'm-', 'LineWidth', 1.5);
plot(FLH, Mean_LCOH_AEC_ct, 'm--', 'LineWidth', 1.5);
xlabel('FLH');
ylabel('LCOH');
title('LCOH vs FLH for SOEC, PEM, and AEC');
legend('Lower SOEC', 'Upper SOEC', 'Mean SOEC', 'Lower PEM', 'Upper PEM', 'Mean PEM', 'Lower AEC', 'Upper AEC', 'Mean AEC');
grid on;
hold off;
% Plot the graph for lower, upper, and mean LCOH of SOEC, PEM, and AEC
figure(2);
% Plot SOEC
plot(FLH, Lower_LCOH_SOEC_mm, 'b-', 'LineWidth', 1.5);
hold on;
plot(FLH, Upper_LCOH_SOEC_mm, 'b-', 'LineWidth', 1.5);
plot(FLH, Mean_LCOH_SOEC_mm, 'b--', 'LineWidth', 1.5);
% Plot PEM
plot(FLH, Lower_LCOH_PEM_mm, 'g-', 'LineWidth', 1.5);
plot(FLH, Upper_LCOH_PEM_mm, 'g-', 'LineWidth', 1.5);
plot(FLH, Mean_LCOH_PEM_mm, 'g--', 'LineWidth', 1.5);
% Plot AEC
plot(FLH, Lower_LCOH_AEC_mm, 'm-', 'LineWidth', 1.5);
plot(FLH, Upper_LCOH_AEC_mm, 'm-', 'LineWidth', 1.5);
plot(FLH, Mean_LCOH_AEC_mm, 'm--', 'LineWidth', 1.5);
xlabel('FLH');
ylabel('LCOH');
title('LCOH vs FLH for SOEC, PEM, and AEC');
legend('Lower SOEC', 'Upper SOEC', 'Mean SOEC', 'Lower PEM', 'Upper PEM', 'Mean PEM', 'Lower AEC', 'Upper AEC', 'Mean AEC');
grid on;
hold off;
0 Comments
See Also
Categories
Find more on Dynamic System Models in Help Center and File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!