Calculate the difference between minimum values of a parabola and straight line (from a plot)

Hello everyone, please could you help me with a code.
How I can calculate the values from a plot? I need the difference between straight line (P) and between the minimum value of a parabola (P) for each curve.
So, for example in this curve, the difference between the straight blue curve and the first parabola, then the next straight line and green parabola and so on.
My code is:
clear all; close all
W = 60000;
S = 28.2;
AR=7;
cd0 = 0.02;
k = 0.04;
RC=0.51;
clalpha = 2*pi;
Psl=741000;
hv=0:1:10;
cdminp=4*cd0;
clminp=sqrt(3*cd0/k);
Vmin=sqrt(2*W/(1.225*28.2*clminp));
D=0.5*1.225*Vmin^2*S*cdminp;
Pminreq=D*Vmin;
deltaPgiven=RC*W;
figure(1);hold on; xlabel('V');ylabel('P')
hv=0:1:10;
for k1 = 1:numel(hv)
h = hv(k1);
i=0;
for alpha = 1:0.25:15
i=i+1;
rho(i)=1.225*exp(-h/10.4);
cl(i) = clalpha * alpha * pi/180;
V(i) = sqrt(2*W/rho(i)/S/cl(i));
L(i) = 0.5 * rho(i) * V(i) * V(i) * S * cl(i);
cd(i) = cd0 + k * cl(i) * cl(i);
D(i) = 0.5 * rho(i) * V(i) * V(i) * S * cd(i);
clcd(i) = cl(i)/cd(i);
p(i) = D(i)*V(i);
Ph(i)=Psl*(rho(i)/1.225).^0.75;
end
figure(1); plot(V,p)
hold on
plot(V,Ph);
end

 Accepted Answer

Maybe this?
W = 60000;
S = 28.2;
AR=7;
cd0 = 0.02;
k = 0.04;
RC=0.51;
clalpha = 2*pi;
Psl=741000;
hv=0:1:10;
cdminp=4*cd0;
clminp=sqrt(3*cd0/k);
Vmin=sqrt(2*W/(1.225*28.2*clminp));
D=0.5*1.225*Vmin^2*S*cdminp;
Pminreq=D*Vmin;
deltaPgiven=RC*W;
figure(1);hold on; xlabel('V');ylabel('P')
hv=0:1:10;
for k1 = 1:numel(hv)
h = hv(k1);
i=0;
for alpha = 1:0.25:15
i=i+1;
rho(i)=1.225*exp(-h/10.4);
cl(i) = clalpha * alpha * pi/180;
V(i) = sqrt(2*W/rho(i)/S/cl(i));
L(i) = 0.5 * rho(i) * V(i) * V(i) * S * cl(i);
cd(i) = cd0 + k * cl(i) * cl(i);
D(i) = 0.5 * rho(i) * V(i) * V(i) * S * cd(i);
clcd(i) = cl(i)/cd(i);
p(i) = D(i)*V(i);
Ph(i)=Psl*(rho(i)/1.225).^0.75;
end
figure(1); plot(V,p)
hold on
plot(V,Ph);
[pmin, imin] = min(p); % find the min p
deltas(k1) = Ph(1) - pmin; % calculate the difference
tolerance = 5000; % or whatever you want
if (abs(deltas(k1) - 300000) < tolerance)
fprintf('delta = %8.1f at h = %4.1f, rho = %.5f, V = %.2f, Ph = %.1f, p = %.1f\n', ...
deltas(k1), h, rho(imin), V(imin), Ph(imin), p(imin))
end
end
delta = 302330.3 at h = 4.0, rho = 0.83387, V = 64.31, Ph = 555317.0, p = 252986.7
legend(compose('h = %.1f', hv), 'location', 'northwest')
grid on

8 Comments

Yes, thank you! Also, how can I show points of P that brings me an exact delta on graph? For example, delta =3.0233. Also, can I display the values of h, rho, Vmin, Pmin for this exact delta in table?
Thank you very much! But If I will have more h values, so may I display the rows where delta is almost equal to 300000
You are quite welcome.
I don't understand the new question. You can display whatever you want.
Maybe you mean to only display the results if delta is near 30000? How close?
You could put the fprintf statement inside an if condition. Something like
tolerance = 1000; % or whatever you want
if (abs(deltas(k1) - 30000) < tolerance)
fprintf('delta = %8.1f at h = %4.1f, rho = %.5f, V = %.2f, Ph = %.1f, p = %.1f\n', ...
deltas(k1), h, rho(imin), V(imin), Ph(imin), p(imin))
end
Yes, you inderstand it correctly, where I should put this piece of code? I implmented it here:
clear all; close all
W = 60000;
S = 28.2;
AR=7;
cd0 = 0.02;
k = 0.04;
RC=0.51;
clalpha = 2*pi;
Psl=741000;
hv=0:1:10;
cdminp=4*cd0;
clminp=sqrt(3*cd0/k);
Vmin=sqrt(2*W/(1.225*28.2*clminp));
D=0.5*1.225*Vmin^2*S*cdminp;
Pminreq=D*Vmin;
deltaPgiven=RC*W;
figure(1);hold on; xlabel('V');ylabel('P')
hv=0:1:10;
for k1 = 1:numel(hv)
h = hv(k1);
i=0;
for alpha = 1:0.25:15
i=i+1;
rho(i)=1.225*exp(-h/10.4);
cl(i) = clalpha * alpha * pi/180;
V(i) = sqrt(2*W/rho(i)/S/cl(i));
L(i) = 0.5 * rho(i) * V(i) * V(i) * S * cl(i);
cd(i) = cd0 + k * cl(i) * cl(i);
D(i) = 0.5 * rho(i) * V(i) * V(i) * S * cd(i);
clcd(i) = cl(i)/cd(i);
p(i) = D(i)*V(i);
Ph(i)=Psl*(rho(i)/1.225).^0.75;
end
figure(1); plot(V,p)
hold on
plot(V,Ph);
[pmin, imin] = min(p); % find the min p
deltas(k1) = Ph(1) - pmin; % calculate the difference
tolerance = 1000; % or whatever you want
if (abs(deltas(k1) - 30000) < tolerance)
fprintf('delta = %8.1f at h = %4.1f, rho = %.5f, V = %.2f, Ph = %.1f, p = %.1f\n', ...
deltas(k1), h, rho(imin), V(imin), Ph(imin), p(imin))
end
legend(compose('h = %.1f', hv), 'location', 'northwest')
grid on
end
That's close to what I would do, but I would keep the legend and grid on outside of the for loop. I've edited my answer to reflect this change.
It just represents how close to 300000 the delta has to be to make the code print the results. Adjust as desired.

Sign in to comment.

More Answers (1)

syms h V W S rho cd0 k cl Psl
eqn = V == sqrt(2*W/rho/S/cl);
cl = solve(eqn,cl);
Warning: Solutions are only valid under certain conditions. To include parameters and conditions in the solution, specify the 'ReturnConditions' value as 'true'.
cd = cd0 + k * cl^2;
D = 0.5 * rho * V * V * S * cd;
p = D*V;
Vmin = solve(diff(p,V)==0,V);
pmin = subs(p,V,Vmin);
Ph = Psl*(rho/1.225)^0.75;
hnum = 0:0.01:10;
Wnum = 60000;
Snum = 28.2;
rhonum = 1.225*exp(-hnum/10.4);
cd0num = 0.02;
knum = 0.04;
Pslnum = 741000;
for i = 1:numel(hnum)
Phnum(i) = double(subs(Ph,[rho Psl],[rhonum(i),Pslnum]));
pm = double(subs(pmin,[W S rho cd0 k],[Wnum Snum rhonum(i) cd0num,knum]));
pminnum(i) = pm(end);
deltaP(i) = Phnum(i)-pminnum(i);
end
format long
deltaP.'
ans = 1001×1
1.0e+05 * 5.322767552311991 5.316422010284389 5.310079836471793 5.303741027866013 5.297405581460750 5.291073494251587 5.284744763235998 5.278419385413340 5.272097357784856 5.265778677353669
idx = deltaP > 2.8e5 & deltaP < 3.2e5; % select those deltaP with 2.8e5 <= deltaP < = 3.2e5
[hnum(idx).' deltaP(idx).'] % Show these values together with the corresponding h values
ans = 77×2
1.0e+05 * 0.000036700000000 3.196913122178178 0.000036800000000 3.191616062324753 0.000036900000000 3.186321382077705 0.000037000000000 3.181029079029593 0.000037100000000 3.175739150774377 0.000037200000000 3.170451594907418 0.000037300000000 3.165166409025479 0.000037400000000 3.159883590726722 0.000037500000000 3.154603137610705 0.000037600000000 3.149325047278384

2 Comments

Thank you very much! But If I will have more h values, so may I display the deltaP values that are almost equal to 3?
Add the lines
idx = deltaP > 2.8e5 & deltaP < 3.2e5; % select those deltaP with 2.8e5 <= deltaP < = 3.2e5
[hnum(idx) deltaP(idx)] % Show these values together with the corresponding h values
at the end of the code.

Sign in to comment.

Categories

Find more on Programming in Help Center and File Exchange

Products

Release

R2022b

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!