when i creat a ros2 node ,it dosn't work.why 'Input data can only contain ASCII characters' ?

>> test1 = ros2node("/test1")

Error using ros2node/createNode

Error creating the ROS 2 node /test1.

Error in ros2node (line 129)

createNode(obj, parser.Results.name, parser.Results.id);

Caused by:

Error using ros.internal.Node/create

Input data can only contain ASCII characters.

[Walter Roberson]

try

test1 = ros2node('/test1')

[鑫 王]

It doesn't change anything, does it

[Walter Roberson]

It works for me when I test with MATLAB Online.

I suspect that you might have a third-party version of some function called by the internal workings. Unfortunately those functions are compiled so I cannot look at the source to figure out what

As an experiment try

restoredefaultpath; rehash toolboxcache

and then try the command. If it works then the problem is in some folder you have added to your path.

[鑫 王]

sorry i didn't see it.thanks for your help,these code help me handle another question.

Answer 1

[Josh Chen]

Hello Xin,

I tried the same command you posted here on my end and it successfully created a ROS 2 node.

As Walter mentioned, the culprit could be some third-party files added to MATLAB path. Please try to restore to default path as suggested.

If the issue still persist, we would need more information about your setup and environment to take a closer inspection. Please reach out to MathWorks Technical Support and get connected with our technical support team.

Thanks,

Josh

[wei du]

It doesn't work.