Quick-Control Interfaces

Communicate with IVI-C-based instruments using Quick-Control Oscilloscope, Function Generator, and RF Signal Generator

The Quick-Control interfaces are used to control oscilloscopes, function generators, or RF signal generators that use an underlying IVI-C driver. You do not have to deal directly with the driver in these easy-to-use interfaces.

Functions

`oscilloscope`	Connection to Quick-Control Oscilloscope instrument
`fgen`	Connection to Quick-Control Function Generator instrument
`rfsiggen`	Connection to Quick-Control RF Signal Generator instrument
`readWaveform`	Returns waveform displayed on scope
`configureChannel`	Return or set specified oscilloscope control on selected channel
`download`	Downloads arbitrary waveform to RF signal generator
`start`	Enables RF signal generator signal output and modulation output
`resources`	List of available instrument resources for Quick-Control interfaces
`drivers`	List of available instrument drivers for Quick-Control interfaces
`connect`	Connect device object to instrument
`disconnect`	Disconnect device object from instrument

Topics

Quick-Control Oscilloscope

Quick-Control Oscilloscope Requirements
You can use the Quick-Control Oscilloscope for any oscilloscope that uses an underlying IVI-C driver.
Read Waveforms Using the Quick-Control Oscilloscope
This example shows the general workflow to use for the Quick-Control Oscilloscope.
Read a Waveform Using a Tektronix Scope
Reading a waveform with a Tektronix^® scope using Quick-Control Oscilloscope is basically the same workflow as described in the Read Waveforms Using Quick-Control Oscilloscope example using a Keysight^® scope with VISA.
Quick-Control Oscilloscope Functions
The oscilloscope function can use the following special functions, in addition to standard functions such as connect and disconnect.
Quick-Control Oscilloscope Properties
The Quick-Control Oscilloscope oscilloscope function can use the following properties.

Quick-Control Function Generator

Quick-Control Function Generator Requirements
You can use the Quick-Control Function Generator for simplified fgen control and waveform generation without having to directly deal with the underlying driver.
Generate Standard Waveforms Using the Quick-Control Function Generator
Use the Quick-Control Function Generator to generate a standard waveform.
Generate Arbitrary Waveforms Using Quick-Control Function Generator
Use the Quick-Control Function Generator to generate an arbitrary waveform.
Quick-Control Function Generator Functions
The fgen function uses the following functions, in addition to standard functions such as connect and disconnect.
Quick-Control Function Generator Properties
The fgen function can use the following properties.

Quick-Control RF Signal Generator

Quick-Control RF Signal Generator Requirements
You can use the Quick-Control RF Signal Generator for simplified rfsiggen control and waveform generation without having to directly deal with the underlying driver.
Quick-Control RF Signal Generator Functions
The rfsiggen function uses the following functions.
Quick-Control RF Signal Generator Properties
The rfsiggen function uses the following properties.
Download and Generate Signals with RF Signal Generator
These examples show how to create the rfsiggen object, download waveforms, and generate signal and modulation output.

Troubleshooting

Troubleshooting IVI and Quick-Control Interfaces

Try these tips if you have problems using the toolbox with the IVI and Quick-Control interfaces. Includes information about supported platforms, adaptor requirements, configuration and connection, and other interface-specific tips.

Featured Examples

Reading Waveforms from an Oscilloscope Using a Quick-Control Oscilloscope Object

Use the Quick-Control Oscilloscope to acquire waveforms from an oscilloscope.

Creating and Downloading an Arbitrary Waveform to a Function Generator

Use the Quick-Control Function Generator to generate arbitrary waveforms.

Open Script

802.11 OFDM Beacon Frame Generation and Transmission with Test and Measurement Equipment

Generate packets containing MAC beacon frames suitable for baseband simulation or over-the-air transmission using WLAN Toolbox™ software, Instrument Control Toolbox™ software, and Keysight Technologies™ RF signal generator.

Open Live Script

LTE Waveform Generation and Transmission Using Quick Control RF Signal Generator

How an over-the-air LTE waveform can be generated and transmitted using LTE Toolbox™, Instrument Control Toolbox™ and Keysight Technologies® RF instruments.

Open Script

Creating and Downloading an IQ Waveform to a RF Signal Generator

Use the Quick-Control RF Signal Generator to generate and transmit RF waveforms.

Open Script

Create App for Acquiring Waveform Data from Oscilloscope

Create an app to acquire waveform data from an oscilloscope.

Open Live Script