Quick-Control RF Signal Generator Functions

The rfsiggen function uses the following functions, in addition to standard Instrument Control Toolbox™ functions such as connect and disconnect.

Function	Description
drivers	Return a list of available RF signal generator instrument drivers with their supported instrument models. Example: driverlist = drivers(myRFSigGen); where my myRFSigGen is the name of the rfsiggen object.
resources	Retrieve a list of available instrument resources. It returns a list of available VISA resource strings when using an IVI-C RF signal generator. Example: res = resources(myRFSigGen); where my myRFSigGen is the name of the rfsiggen object.
download	Download an arbitrary waveform to the RF signal generator. It accepts a complex vector of doubles containing the IQData and a double defining the SampleRate of the signal. Example: rf = rfsiggen('TCPIP0::172.28.22.99::inst0::INSTR','AgRfSigGen') IQData = (-0.98:0.02:1) + 1i*(-0.98:0.02:1); SampleRate = 800000; download(rf, IQData, SampleRate)
start	Enable the RF signal generator signal output and modulation output. It takes a double value for each of the three required arguments: CenterFrequency specified in Hz, OutputPower specified in dBm, and LoopCount, which represents the number of times the waveform should be repeated. Example: rf = rfsiggen('TCPIP0::172.28.22.99::inst0::INSTR','AgRfSigGen') CenterFrequency = 4000000 OutputPower = 0 LoopCount = inf start(rf, CenterFrequency, OutputPower, LoopCount)
stop	Stop the RF signal generator signal output and modulation output. stop(rf); where rf is the name of the rfsiggen object.
reset	Set the RF signal generator to factory default state.