Simulink Onramp 13.1 Task 5

I am encountering an error with task 5 of the simulink onramp. The task says to set the initial value to 60, but when i do it says the the output is wrong. What is the issue with what i did?

Answer 1

[Sai Sri Pathuri]

You need to connect signal h to the input of switch block

[David Nicholson]

okay, thank you

[Arunraddi R Mullur]

Hello,

Even after connecting h to signal and switch.. Unable to pass

please help.

[Oussama Bousken]

It works for me Thank you so much

[Harindu Jayarathne]

@Arunraddi R Mullur I restarted Matlab and it worked.

Answer 2

[J.Rezvani]

h signal has to connect to both signal assessment and the middle input port of the switch block. also, the second integrator's initial value is 60.

Answer 3

[OM]

Firstly you have to set the initial condition of Integrator 1 to 60 m.

Then you have to set the initial condition of Integrator 2 to -10m.

Answer 4

[Roshan]

For new learners: For the task 5, the stop time is 10, check whether you have entered exactly 10 to trace everything as per the requirement of the task. Also dont't forget to connect h to the signal requirement.