simulink running external mode has problem with compile

 Code Generation  1
Elapsed: 10 sec
Unexpected error : [armeabi-v7a] Compile thumb  : androidCommunicationExample <= ert_main.c
In file included from ../ert_main.c:4:
In file included from F:/demo/androidCommunicationExample_ert_rtw/androidCommunicationExample.h:10:
F:/demo/androidCommunicationExample_ert_rtw/rtwtypes.h:4:10: fatal error: 'tmwtypes.h' file not found
#include "tmwtypes.h"
         ^~~~~~~~~~~~
1 error generated.
make: *** [F:\demo\androidCommunicationExample_ert_rtw\androidCommunicationExample\src\main/obj/local/armeabi-v7a/objs/androidCommunicationExample/ert_main.o] Error 1

[Sruthi Yenugula]

Hi Eric, Can you provide the output of the ver command(type ver in MATLAB command prompt)

Are you able to build the other models in Normal mode(Deploy to Hardware)?

[eric huang]

Hi ,Sruthi Yenugula , Thank for your help . Now ,I use serial port to connect my device.

Answer 1

[yubao cao]

HI，I meet the same question.

But I don't know how to solve it.

[Sruthi Yenugula]

Hi yubao cao ,

There is some issue with your MATLAB installation, please reinstall the MATLAB and Support Package.

Answer 2

[Sruthi Yenugula]

This error is encountered when the MATLAB installation is not correct, so please reinstall the MATLAB and try again.

Answer 3

[omar sheishaa]

Hi Sruthi Yenugula

kindly note that i reinstalled matlab on different device along with the support packages and still facing the same issue as below

Unexpected error : [armeabi-v7a] Install : libopencv_java3.so => libs/armeabi-v7a/libopencv_java3.so [armeabi-v7a] Compile thumb : slexHARAndroidExample <= ert_main.c In file included from ../ert_main.c:4: In file included from C:/Users/user/Documents/MATLAB/SLEXHA~1/slexHARAndroidExample.h:9: C:/Users/user/Documents/MATLAB/SLEXHA~1/rtwtypes.h:4:10: fatal error: 'tmwtypes.h' file not found #include "tmwtypes.h" ^~~~~~~~~~~~ 1 error generated. make: *** [C:\Users\user\Documents\MATLAB\slexHARAndroidExample_ert_rtw\slexHARAndroidExample\src\main/obj/local/armeabi-v7a/objs/slexHARAndroidExample/ert_main.o] Error 1

### Build procedure for model: 'slexHARAndroidExample' aborted due to an error.

Error(s) encountered while building "slexHARAndroidExample": ### Failed to generate all binary outputs.

[Sruthi Yenugula]

Hi Omar,

Please contact the technical support https://www.mathworks.com/support/contact_us.html . This would help to understand your issue better and provide quick solution.

Answer 4

[omar sheishaa]

Hi Sruthi

thanks for your feeback, now i'm trying to run 'slexHARAndroidExample' on simulink without deploying it on android device but i got the below errors

Index exceeds array dimensions. Index value 0 exceeds valid range [1-2049] of array f.

Error in 'slexHARAndroidExample/extractFeatures' (line 133)

ofpk = f(olocs);

Error in 'slexHARAndroidExample/extractFeatures' (line 62)

Error in 'slexHARAndroidExample/extractFeatures' (line 16)

also the details of this file are found in the below link

https://www.mathworks.com/help/stats/human-activity-recognition-simulink-model-for-deployment.html

[Image Analyst]

Well, use standard debugging techniques to figure out why olocs is zero.

[omar sheishaa]

i'm looking into it by blocks, so the first block is 'Calibrate' i tried to call it in the command line and gave the 3 attributes values but i got the output as 1 value not x,y,z

the function code is as below

function [xout,yout,zout] = calibrate(x,y,z)%#codegen

% calibrate - Static calibration of the accelerometer for an

% Android device.

% Copyright 2017 The MathWorks, Inc.

calibrationstr = coder.load('slexHARAndroidCalibrationMatrix.mat');

calibrationMatrix = coder.const(calibrationstr.AndroidCalibrationMatrix);

out = [x,y,z,1]*calibrationMatrix;

xout = out(1);

yout = out(2);

zout = out(3);

[Sruthi Yenugula]

Hi omar sheishaa,

Did you make any changes to the example or followed the same exact steps? When I try it is working fine from my end. Please contact customer support, they will help you debug the issue.

[omar sheishaa]

Hi Sruthi

could you please advise what did you get when you run this model without deployment ?

Answer 5

[omar sheishaa]

Hi Sruthi

i didn't perform any changes, did you deploy it on android device ? are you able to run the model on the PC without deployment ?