Support for I2C in "Simulink Coder for BeagleBone Blue"

Hi there, is it possible to use I2C communication on a BeagleBone Blue hardware using the add-on called "Simulink Coder support package for BeagleBone blue?

The online documentation shows that it should be possible for BeagleBone black. But I am struggling to solve it for the Blue.

In particular, this is what I get if I create the corresponding object for the Blue:

>> bbb=beagleboneblue

bbb =

beagleboneblue with properties:

    DeviceAddress: '192.168.7.2'
             Port: 22

In contrast, what is documented for the Black, gives

bbb =

beaglebone with properties:

           DeviceAddress: '192.168.7.2'
               BoardName: 'BeagleBone Black Rev 00C0'
           AvailableLEDs: {'USR0'  'USR1'  'USR2'  'USR3'}
    AvailableDigitalPins: {1x29 cell}
     AvailableAnalogPins: {'AIN0'  'AIN1'  'AIN2'  'AIN3'  'AIN4'  'AIN5'  'AIN6'}
        AvailablePWMPins: {}
    AvailableSPIChannels: {}
       AvailableI2CBuses: {'i2c-1'}
    AvailableSerialPorts: {}
        AvailableWebcams: {}

Am I doing anything wrong or is that the suppport for BeagleBone Blue is so much severely restricted?

Thanks, Marek

[Matej Kopecky]

I'm having the same problem. Were you able to resolve this?