how to set different axis value?
2 views (last 30 days)
Show older comments
I want to change the axis display value in a contour plot.
xylim = 0.0055 ;
N = 5; x = linspace(-xylim,xylim,N); y = x;
[X,Y] = meshgrid(x,y);
r = (X.^2 + Y.^2); rho = sqrt(r);
f = 0.011 ;
theta = atan(rho./f) ;
CPhi = X./rho; SPhi = Y./rho;
if mod(N,2) == 1
CPhi((N-1)/2+1,(N-1)/2+1) = 1;
SPhi((N-1)/2+1,(N-1)/2+1) = 0;
end
%% Function
n1 = 1;
n2 = 1.5 ;
thetaI = theta;
Th = theta*180/pi;
thetaT = asin((n1./n2).*sin(thetaI));
CTi = cos(thetaI);
CTt = cos(thetaT);
a = (n2.*CTi - n1.*CTt) ;
b = (n2.*CTi + n1.*CTt) ;
c = (n1.*CTi - n2.*CTt) ;
d = (n1.*CTi + n2.*CTt) ;
Rp = a./b;
Rs = c./d;
figure,contourf(X,Y,Rp,20);
Now the x and y axis has value -5 to +5 mm, from the below image we can see. I want to change the axis value from X and Y to the value of the red cross line of the Th value chart(below image) which is a function of X and Y. So new x axis should be [26.5651 14.0362 0 140362 26.5651} and new y axis [26.5651 14.0362 0 140362 26.5651}. can anyone help me please? Thank you.
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1295705/image.png)
0 Comments
Accepted Answer
Kevin Holly
on 14 Feb 2023
xylim = 0.0055 ;
N = 5; x = linspace(-xylim,xylim,N); y = x;
[X,Y] = meshgrid(x,y);
r = (X.^2 + Y.^2); rho = sqrt(r);
f = 0.011 ;
theta = atan(rho./f) ;
CPhi = X./rho; SPhi = Y./rho;
if mod(N,2) == 1
CPhi((N-1)/2+1,(N-1)/2+1) = 1;
SPhi((N-1)/2+1,(N-1)/2+1) = 0;
end
%% Function
n1 = 1;
n2 = 1.5 ;
thetaI = theta;
Th = theta*180/pi;
thetaT = asin((n1./n2).*sin(thetaI));
CTi = cos(thetaI);
CTt = cos(thetaT);
a = (n2.*CTi - n1.*CTt) ;
b = (n2.*CTi + n1.*CTt) ;
c = (n1.*CTi - n2.*CTt) ;
d = (n1.*CTi + n2.*CTt) ;
Rp = a./b;
Rs = c./d;
figure,contourf(X,Y,Rp,20);
h=gca;
% X Axis
h.XTick = [-0.0055,-0.0028,0,0.0028,0.0055];
newx = [26.5651 14.0362 0 140362 26.5651];
h.XAxis.TickLabels = {newx};
% Y Axis
h.YTick = [-0.0055,-0.0028,0,0.0028,0.0055];
newy = [26.5651 14.0362 0 140362 26.5651];
h.YAxis.TickLabels = {newx};
1 Comment
Walter Roberson
on 14 Feb 2023
this is the changing labels option that I mentioned. As I noted it does not change coordinates for data tips. Or for ginput or similar.
More Answers (2)
Walter Roberson
on 14 Feb 2023
there are two different things you might mean.
If you want to change the actual x and y coordinates to the ones you indicated then you will have problems because your coordinates are not sorted and you would be warping the contour over an irregular surface. It could be done if strictly necessary, but it would take some work to transform the contour into something that could be warped over a surface.
But possibly you just want to change the x and y labels. You can do that by calling xtick and ytick and xlabel and ylabel routines. This would only change the decoration and would not for example affect datatips
0 Comments
Tiisetso Jeanet
on 21 Apr 2024
how to make the x-axis have have an interval running from 1990:2022 having space of 5
e.g 1990,1995
0 Comments
See Also
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!