Arduino Simulink Analog input

9 views (last 30 days)
anil
anil on 3 Feb 2014
Commented: Quang Huy on 10 Jan 2021
I AM USING A AUDRINO ANALOG INPUT PIN TO DISPLAY A VOLTAGE. WHEN I RUN THE MODEL ON TARGETED HARDWARE I ENDED UP GETTING ZERO. CAN ANY ONE HELP ME...

Answers (3)

Rolfe Dlugy-Hegwer
Rolfe Dlugy-Hegwer on 7 Feb 2014
Hi Anil, It sounds like you clicked the Run (green triangle) button, which simulates the model on your host computer. Try clicking the Deploy to Hardware button instead. See http://www.mathworks.com/help/simulink/ug/run-model-on-arduino-hardware.html
  4 Comments
Terry Ramsey
Terry Ramsey on 16 Feb 2014
Edited: Terry Ramsey on 16 Feb 2014
my blocks being used are: Analog Input (pin 0). I have pin 0 on arduino connected to an analog input(a potentiometer with 0-5V in this case). Sample time = 0.5. A Display block. Short format. Decimation = 1. They are connected together.
Not sure why this isnt working.
anil
anil on 28 May 2014
Edited: anil on 28 May 2014
HI Terry Ramsey, the external mode isn't work on the arduino uno. it will run on the arduino mega. they say uno doesn't have enough memory to perform in external mode.
i got this from matlab virtual seminor.

Sign in to comment.


zeghib okba
zeghib okba on 10 May 2016
Edited: zeghib okba on 10 May 2016
Hi Anil, the problem may be doing from 2 things:
1- you should be using arduino mega2560 for display a voltage.
2- You may be inverted the signal, because arduino is not accepted negative signal.

Tal Dachlika
Tal Dachlika on 29 Jan 2018
I had the same problem with arduino uno and I fixed it, just change the mode to external: simulation->mode-> external.
  1 Comment
Quang Huy
Quang Huy on 10 Jan 2021
I had the same problem with arduino uno. I tried it the way you do but not sucessfull.

Sign in to comment.

Categories

Find more on Simulink Support Package for Arduino Hardware in Help Center and File Exchange

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!