Send UDP message to UDP host
Simulink Support Package for Parrot Minidrones
The UDP Send block sends an input vector as UDP message over an IP network port to a UDP host.
Specify the IP address and the port number of the receiving host in the Remote IP address and Remote IP Port parameter.
Port1— Send UDP messages to another UDP host
The port accepts an array and sends it as UDP messages over an IP network port to the receiving host.
Remote IP address— IP address of receiving UDP host
Specify the IP address or the host name to which the block sends the UDP messages. The Remote IP address is set at 192.168.3.2; do not change this IP address.
Remote IP Port— IP port on the receiving UDP host
25000(default) | [1, 65535]
Specify the port number of the application on the receiving host to which you want to send the messages. Match the remote port number with the local port number of the receiving host.
Do not use ports
for UDP communication with Parrot minidrone as these ports are
Local IP Port— IP port on the sending UDP host
2048(default) | [1, 65535]
This parameter appears if you select the
dialog option for Local IP port
source. Specify the port number of the application from which
you want to send the messages.