Main Content

addconfigset (model)

Create configuration set object and add to model object


configsetObj = addconfigset(modelObj, 'NameValue')
configsetObj = addconfigset(..., 'PropertyName', PropertyValue, ...)


modelObjModel object. Enter a variable name.
NameValueDescriptive name for a configuration set object. Reserved words 'active' and 'default' are not allowed.
configsetObjConfigset object.


configsetObj = addconfigset(modelObj, 'NameValue') creates a configuration set object and returns to configsetObj.

In the configuration set object, this method assigns a value (NameValue) to the property Name.

configsetObj = addconfigset(..., 'PropertyName', PropertyValue, ...) constructs a configuration set object, configsetObj, and configures configsetObj with property value pairs. The configsetObj properties are listed in Property Summary.

A configuration set stores simulation specific information. A model object can contain multiple configuration sets, with one being active at any given time. The active configuration set contains the settings that are used during a simulation. configsetObj is not automatically set to active. Use the function setactiveconfigset to define the active configset for modelObj.

Use the method copyobj to copy a configset object and add it to the modelObj.

Method Summary

Methods for configuration set objects

copyobjCopy SimBiology object and its children
deleteDelete SimBiology object
displayDisplay summary of SimBiology object
getGet SimBiology object properties
setSet SimBiology object properties

Property Summary

Properties for configuration set objects

ActiveIndicate object in use during simulation
NameSpecify name of object
NotesHTML text describing SimBiology object
TypeDisplay SimBiology object type


collapse all

This example shows how to add a configset object to a SimBiology model and set it up for simulation.

Load the sample radiodecay model m1, and add a Configset object to the model.

sbioloadproject radiodecay;
configsetObj = addconfigset(m1, 'myset');

Configure the simulation stop criteria by setting the StopTime property.

configsetObj.StopTime = 15;

Set the configset object to be active so that its settings are used during simulation.


Simulate the model and plot results.

simdata = sbiosimulate(m1);

Version History

Introduced in R2006a