Hardware Implementation Pane: ZedBoard

To configure hardware parameters for ZedBoard™, follow these steps:

In the Simulink^® Editor, select Simulation > Model Configuration Parameters.
In the Configuration Parameter dialog box, click Hardware Implementation.
Set the Hardware board parameter to either:
- AMD Zynq ZC702 evaluation kit
- AMD Zynq ZC706 evaluation kit
- ZedBoard
Then, click Apply.
The parameter values under Hardware board settings are automatically populated to their default values.
If you chose AMD Zynq ZC706 evaluation kit or ZedBoard, set the Feature set for selected hardware board to Simulink or Embedded Coder Hardware Support Package and click Apply.
You can optionally adjust these parameters for your particular use case.
Click Apply.

For more information on selecting a hardware support package and general configuration settings, see Hardware Implementation Pane. For configuration information for other development boards related to this support package, see Hardware Implementation Pane: AMD Zynq ZC702/ZC706 Evaluation Kits.

Parameter	Description
Base rate task priority	Static priority of base rate task of Simulink model
Detect task overruns	Detection of failure to complete execution of current loop within current time step

Parameter	Description
Device Address	Device IP address or host name of target hardware
Username	User name for operating system on target hardware
Password	User password for operating system on target hardware

Parameter	Description
CPU Clock (MHz)	Frequency of the primary CPU core clock

Parameter	Description
Build action	Simulink Coder™ build operation for model

Parameter	Description
Communication interface	Transport layer external mode uses to exchange data
Run external mode in a background thread	Execution of external mode task in generated code within background thread
Port	TCP/IP port number of target hardware
Verbose	Verbose status messages for external mode execution progress and updates

See Also