Communication interface

Transport layer external mode uses to exchange data

expand all in page

Model Configuration Pane: Hardware Implementation / Simulink or Embedded Coder Hardware Support Package / Hardware board settings / Target hardware resources / External mode

Description

The Communication interface parameter selects the transport layer that external mode uses to exchange data between the host computer and the target hardware.

Dependencies

None

Settings

TCP/IP (default) | XCP on TCP/IP

The Communication interface parameter selects TCP/IP or XCP on TCP/IP as the transport layer that external mode uses to exchange data between the host computer and the target hardware.

Note

For the Embedded Coder® Support Package for AMD SoC Devices, use the XCP protocol for simulation as described in External Mode Simulation by Using XCP Communication. Support will be removed for External Mode Simulation with TCP/IP in a future release.

Examples

expand all

  1. In the Simulink® Editor, select Simulation > Model Configuration Parameters.

  2. In the Configuration Parameters dialog box, click Hardware Implementation.

  3. Set the Hardware board parameter to either:

    • AMD Zynq ZC702 evaluation kit

    • AMD Zynq ZC706 evaluation kit

    • ZedBoard

    Then, click Apply.

    The parameter values under Hardware board settings are automatically populated to their default values.

  4. If you chose AMD Zynq ZC706 evaluation kit or ZedBoard, set the Feature set for selected hardware board to Simulink or Embedded Coder Hardware Support Package and click Apply.

  5. From the External mode group, select a Communication interface from the drop down list and click Apply.

  6. Click OK to close the dialog box.

Recommended Settings

No recommendation.

Programmatic Use

No programmatic use is available.

Version History

Introduced in R2014b

See Also

|

Topics