PLC Support from Industrial Communication Toolbox

Access data on PLCs from ABB, Beckhoff, Mitsubishi Electric, Rockwell Automation, Siemens, and other vendors

Industrial Communication Toolbox provides an OPC UA client and Modbus interface that let you:

Exchange data with any PLC that is exposed through an OPC UA server
Access PLCs with Modbus servers using the Modbus client interface provided with the toolbox
Use Simulink blocks and MATLAB functions to connect via OPC UA and Modbus, enabling you to communicate with your PLC

Some of the PLC vendors supported by Industrial Communication Toolbox are listed in the table below. Consult the table for additional resources.

Industrial Controller/PLC system	Configuration Resources
ABB AC500 PLC	AC500 V3 AND OPC UA
B&R Automation X20	X20 OPC UA Bus Controller
Bachmann	Bachmann OPC UA Server
Beckhoff Embedded Controllers	TF6100 \| TwinCAT 3 OPC UA
Bosch Rexroth	ctrlX Asutomation OPC UA Server
Codesys	Using CODEYSYS PLC as an OPC UA Server
Fuji Electric	Fuji Electric HMI X1 Series with OPC UA Server
Keyence	KV-8000A CPU Unit with Built-In OPC UA Server Function \| Programmable Logic Controller KV-8000A
Mitsubishi Electric MELSEC IQ-R Series	MELSEC iQ-R OPC UA Server module
Omron NJ/NX Series	Omron NJ/NX Serfies CPU Unit OPC UA
Phoenix Contact	PC WORX UA SERVER-PLC 40
Rockwell Automation Allen-Bradley Control Logix	Configure an OPC UA server on a CompactLogix 5480 controller
Schneider Electric Modicon M580	OPC UA Embedded Module Configuration Guide
Siemens SIMATIC S7	OPC UA Methods for the Simatic S7-500 OPC UA Server

Any industrial controller with an OPC UA or Modbus interface