Tessa Kol
Last seen: 3 days ago
29 total contributions since 2020
Tessa Kol's Badges
Download any 10 unique submissions
Awarded to Tessa Kol on 01 Oct 2020
Publish your first comment or rating
Awarded to Tessa Kol on 29 Sep 2020
Accept 5 answers given by other contributors
Awarded to Tessa Kol on 04 Sep 2020
Question
Multiple y axes with multiple plots on single x axis
Dear all, I tried to plot three y-axis where each y-axis contains two lines. I used the approach described in this post: https:...
24 days ago | 1 answer | 0
1
answerQuestion
Locating point on x-axis where the slope is decreasing
Dear all, I used the following code to plot the angle over time: figure hold on grid on plot(Time, theta,'linewidth',1.5) ...
1 month ago | 2 answers | 0
2
answersQuestion
Rearrange data plot3 and combine data points
Dear all, The following piece of code creates a 3D plot. Normally I import the mass data from a .csv file, but for convenience ...
1 month ago | 1 answer | 0
1
answerQuestion
Surface plot using fitrpg
Dear all, I tried to make a surface plot of the gaussian process function with the following code: gprMdl = fitrgp(X,Y1,'Kerne...
6 months ago | 2 answers | 0
2
answersQuestion
Plot gaplotdistance in one plot for multiple runs of genetic algorithm
Dear all, With the code below I managed to run the genetic algorithm multiple times. gprMdl2 = fitrgp(X,Y1,'KernelFunction','s...
6 months ago | 1 answer | 0
1
answerQuestion
Index in position 2 exceeds array bounds using crossval
Dear all, I got the following error when using crossval. Error using crossval>evalFun (line 488) The function '@(Xtr,Ytr,Xte)...
6 months ago | 1 answer | 0
1
answerQuestion
Assign values of .mat files into matrix
Dear all, I have multiple .mat files (see attachment). I want to organize the MFR_mod variables within the those .mat files int...
6 months ago | 3 answers | 0
3
answersQuestion
Classify imported files from multiple folders into cell array
Dear all, I have multiple files located in multiple folders. De main folder I called 'test'. De main folder contains 6 subfolde...
6 months ago | 1 answer | 0
1
answerQuestion
How to use bayesian optimization?
Dear all, I am trying to find a good way to use bayesian optimization that will give me the optimal simulation parameters that ...
6 months ago | 1 answer | 0
1
answerQuestion
Points inside multiple polygon for contour
I made the following contourplot. Then, I plot discretized points over this plot. I wanted to find the (x,y) coordinates o...
7 months ago | 2 answers | 1
2
answersVelocity vector plot with empty cell array
Solved it myself with an if else statement, see code below. for i = 1:N_run for t = 1:length(col) if cellfun(@ise...
7 months ago | 0
| accepted
Question
Velocity vector plot with empty cell array
With the following code I made a velocity vector plot over time. %% Velocity vector plot close all x_cent = mean(X(1,1:2)...
7 months ago | 2 answers | 0
2
answersQuestion
Convert a non uniform cell array of cell arrays to matrix
I have the following code: %% Loading the data rhoPart = 2540; files = dir(fullfile(uigetdir,'\**\*.data*')); [~,Index] = ...
7 months ago | 1 answer | 0
1
answerQuestion
Devide cell array into unequal length cells based on file name
With the following code I imported all of the .data files. All .data files of simulation 1 are located in folder 1 and all .data...
7 months ago | 1 answer | 0
1
answerQuestion
Use inpolygon command for multiple polygon areas
Dear all, I have some difficulty with assigning points into multiple square polygons. I have data files containing (x,y,z) coor...
7 months ago | 2 answers | 0
2
answersFind value in another cell array based on condition
Here the code that was succesfull for me: for i = 1:N_run %Number of simulation runs, which is for me 81 simulations s...
7 months ago | 0
| accepted
Question
Find value in another cell array based on condition
I have a folder containing the following files: Every file has the same format, but for a different time step: First (header...
7 months ago | 1 answer | 0
1
answerQuestion
Error using brace indexing with function hypot
I have a number of data files where every data file is stored in a cell array. Thus, : datac.1 is stored in expData{1,1} at tim...
7 months ago | 1 answer | 0
1
answerQuestion
Indexing arrays of binned data
Dear all, I have a cell array expData of 2745x1 cell. For every cell in this cell array I define the same range (i.e. bins). Th...
7 months ago | 3 answers | 0
3
answersQuestion
Error using accumarray in for loop with cell array
I am having trouble with using accumarray in a for loop. Hers is my code so far: for i = 1:length(files) % Define the rang...
7 months ago | 0 answers | 0
0
answersGroup discretized data and determine mean
I found the solution myself. Here is an example for a single data file: mean = accumarray(disc_x{1,1}(:,1), expData{1,1}(:,2),[...
7 months ago | 0
| accepted
Question
Group discretized data and determine mean
Dear all, With help of the community I discretized my data, x-coordinates of particles, into bins. For every bin I want to take...
7 months ago | 1 answer | 0
1
answerQuestion
Setup an optimization problem using Bayesian Optimization
Dear all, Problem:I try to find the optimal set of variables using Bayesian optimization. Before I go further into the depth,...
7 months ago | 1 answer | 0
1
answerQuestion
Import range of files based on file name
I have a folder containing around 300,000 files. I don't need to import all the files. Problem: How can I import a range of fi...
8 months ago | 1 answer | 0
1
answerQuestion
Import files based on file name
I have a folder containing around 300,000 files. I don't need to import all the files. Problem: How can I import the files base...
8 months ago | 1 answer | 0
1
answerQuestion
How to use gaussian process regression to find the optimal set of parameters?
In a physical experiment I measured some outcome A. Then I set up a simulation of the experiment where I vary two parameters B ...
8 months ago | 1 answer | 0
1
answerQuestion
Open multiple files from the same folder with fopen and textscan
In matlab I wrote the following code: fid = fopen('LedgeTest_muSP_0.20_muRP_0.20.data.852','r'); % Read all the data from the ...
8 months ago | 2 answers | 0
2
answersQuestion
Find corresponding values of discritized data after using splitapply
I have a 3384x5 array of which the first and last 20 rows are shown in the pictures below. With the help of Cris LaPierre I...
8 months ago | 1 answer | 0
1
answerQuestion
Find maximum value of array within specified range, consecutively
I have a 3384x5 array of which the first and last 20 rows are shown in the pictures below. Problem: I want to find the m...
8 months ago | 2 answers | 0
2
answers
Select a Web Site
Choose a web site to get translated content where available and see local events and offers. Based on your location, we recommend that you select: .
Select web siteYou can also select a web site from the following list:
Americas
- América Latina (Español)
- Canada (English)
- United States (English)
Europe
- Belgium (English)
- Denmark (English)
- Deutschland (Deutsch)
- España (Español)
- Finland (English)
- France (Français)
- Ireland (English)
- Italia (Italiano)
- Luxembourg (English)
- Netherlands (English)
- Norway (English)
- Österreich (Deutsch)
- Portugal (English)
- Sweden (English)
- Switzerland
- United Kingdom (English)