Answered
when i want connect to raspberry occure error: Error executing command "make ONLY_MATLAB_IO=0 -C /opt/MATLAB/mw_server_v21.1.0 -f Makefile"
Hi, Setup the Raspberry Pi hardware using hardware setup screen to resolve this issue, you can follow these steps From Home ...

2 years ago | 0

| accepted

Answered
How to solve the error in upload arduino server? the detail says: numeric value exceeds the number of characters in element 1
Hi Can you please reach out to us to resolve this issue? You can contact our technical support for further assistance, https:/...

2 years ago | 0

Answered
Error in opening MATLAB device file for LED trigger source.
Hi All, Follow these steps to resolve the issue, Open Raspberry Pi terminal and execute $ cd /opt/MATLAB/ $ sudo pki...

2 years ago | 5

Answered
Cannot connect to the IP Camera Stream URL
This could be due to a IP camera connection issue mentioned here. It is now fixed in the latest MATLAB update. Update your MATLA...

2 years ago | 0

Answered
Why I can not connect to IP camera with ipcam
As mentioned in the above answer, this connection issue was a known bug. It is now fixed in the latest MATLAB update. Update you...

2 years ago | 1

Answered
Unable to acquire the live (streaming) video h264 over rtsp of my ip camera using the “IP camera acquisition” package on Matlab2020b
The MATLAB Support Package for IP Cameras now supports "digest authentication" from R2022b release.

3 years ago | 1

Answered
Why scanning for nearby Bluetooth Low Energy devices using blelist in macOS 12 (Monterey) returns an empty table?
Update the macOS to macOS Monterey 12.3 or a later version, and then start MATLAB. You can then run blelist with or without argu...

3 years ago | 0

| accepted

Answered
Audio volume level increases automatically when using record function in MATLAB?
This is due to a Windows level system setting that adjusts the volume of different sounds when you are using the microphone. To...

3 years ago | 0

Question

Audio volume level increases automatically when using record function in MATLAB?
I have the Windows system volume set to 50%, but I see the volume automatically increase to around 100% when I use the record fu...

3 years ago | 1 answer | 0

1

answer

Submitted

Navigating-Ryze-Tello-Drones-With-MATLAB-App
A MATLAB app to interactively navigate Ryze Tello drone, read navigation data, process image data and produce equivalent MATLAB ...

3 years ago | 7 downloads |

0.0 / 5

Question

Why scanning for nearby Bluetooth Low Energy devices using blelist in macOS 12 (Monterey) returns an empty table?
MATLAB installed on macOS 12 (Monterey) does not detect nearby Bluetooth Low Energy devices when you run blelist without argumen...

3 years ago | 1 answer | 0

1

answer

Answered
How to connect and control multiple Ryze Tello drones
With the MATLAB Support package for Ryze Tello Drones, you can connect to and control multiple Tello EDU drones from the same MA...

3 years ago | 1

| accepted

Question

How to connect and control multiple Ryze Tello drones
I want to connect to two Ryze Tello EDU drones and navigate them from the same MATLAB session. How can it be done?

3 years ago | 1 answer | 0

1

answer

Answered
Why is read flight data returning empty even after successful connection to the Ryze Tello drone in MATLAB.
This issue could be due to Windows Firewall blocking the port to which the Ryze® Tello drone streams flight data to MATLAB.To fi...

3 years ago | 1

Question

Why is read flight data returning empty even after successful connection to the Ryze Tello drone in MATLAB.
I am able to create a ryze object succesfully. But the flight data for the ryze object is empty. Due to which all read APIs: rea...

3 years ago | 1 answer | 0

1

answer

Answered
cannot programme in MATLAB Support Package for Arduino Hardware
Hi Rushabh, Kindly reach out to MathWorks Technical Support to get help in resolving the issue https://www.mathworks.com/suppo...

4 years ago | 0

| accepted

Answered
Can I interface JY901 sensor to Raspberry Pi?
Yes, we can use JY901 sensor to interface with Raspberry Pi using MATLAB. This sensor supports Modified transactions for NO STAR...

4 years ago | 0

| accepted

Question

Can I interface JY901 sensor to Raspberry Pi?
I have an I2C based altitude angle sensor JY901 sensor which uses I2C protocol Modified transactions. Can I use this sensor to i...

4 years ago | 1 answer | 0

1

answer

Answered
Addressing 16-bit I2C register with Raspberry Pi
Hi Henrik, You can use write() and read() APIs for the same. Here is the code snippet that can help you, >> % Read the data ...

4 years ago | 0

Answered
MATLAB and Raspberry Pi connection problem
Hi, Seems like the Raspberry Pi needs to be setup first, you can do that by performing following steps, * Go to "Home" tab ...

4 years ago | 0

| accepted

Answered
How do I view the live video feed and capture images from my USB Webcam in MATLAB?
The Acquire Webcam Image MATLAB Live Task enables you to interactively: Capture images from a USB Webcam. Adjust the Webcam...

4 years ago | 0

| accepted

Answered
How to create a custom preview window for MATLAB webcam?
You can also try using the Acquire Webcam Image MATLAB Live Task. For more details refer to the following answer https://www.mat...

4 years ago | 0

Answered
How can I insert live video into a MATLAB GUI using Image Acquisition Toolbox?
You can also try using the Acquire Webcam Image MATLAB Live Task. For more details refer to the following answer https://www.mat...

4 years ago | 0

Answered
Using Webcam in GUI to view the image,capture image,save image and acquisition
You can also try using the Acquire Webcam Image MATLAB Live Task. For more details refer to the following answer https://www.mat...

4 years ago | 0

Question

How do I view the live video feed and capture images from my USB Webcam in MATLAB?
Is there an app in which I can view the USB webcam live video feed? Using the video feed I want to adjust the webcam properties ...

4 years ago | 1 answer | 0

1

answer

Answered
Arduino Nano 33 BLE to MATLAB
Hi EB, Kindly note that the support for Nano33BLE will be available from R2021a onward through the MATLAB Support Package for A...

4 years ago | 2

| accepted

Answered
Failed to read i2c device's register with MATLAB Support Package for Raspberry Pi Hardware
Hi FlyWing, Can you please perform following steps and see in all three cases you are getting same values, if not then please c...

5 years ago | 0

Answered
Why does disableI2C() stalls the Raspberry Pi?
This is due to the upstream Linux issue for BCM 2835 based devices. This issue has been reported in following Raspberry Pi forum...

5 years ago | 0

| accepted

Question

Why does disableI2C() stalls the Raspberry Pi?
I have a Raspberry Pi 3B+ with MathWorks customized Raspbian image for R2020b. When I execute following commands, I see an erro...

5 years ago | 1 answer | 0

1

answer

Submitted

MATLAB Support Package for Parrot Drones
Control Parrot drones from MATLAB and acquire sensor data

5 years ago | 124 downloads |

5.0 / 5