Answered
How to change the execution mode of the real-time application in slrt from Singletasking to Multitasking?
Hi Liqun, This is most likely due to the fact that your model uses only one sample rate. You can confirm this by highlighting t...

3 years ago | 0

| accepted

Answered
simulink real-time not useing PCI board
Hi, The host PC and the target machine can only be connected using an Ethernet cable (either direct connection or through a LAN...

3 years ago | 0

| accepted

Answered
Manipulating Parameters real-time in SpeedGoat
Hi Leonid, Do you mean the parameters of the various blocks in your Simulink model? If so, there are several convenient ways to...

3 years ago | 0

| accepted

Answered
Planned support for code generation of sparse optimisation using quadprog()
Hi Will, You might want to check out FORCES PRO from embotech. Their solver can for sure be used with Simulink Real-Time, thoug...

3 years ago | 0

Answered
Connect a real-time desktop with SLRT Explorer
Hi Vincent, I do not think that it's possible to mix Simulink Real-Time tools with Simulink Desktop Real-Time. It is possible, ...

3 years ago | 0

| accepted

Answered
Connectivity problem to target machine
Hi Mats, Could you make sure that no other host PC or MATLAB release is trying to connect to the target? Are you using a direct...

3 years ago | 0

| accepted

Answered
Error: -22: disk full, when using Real-time Scope block with file type.
Hi Sheng, How big is the C:/ drive installed in your target machine? Could it be that it is already full with previous logs gen...

3 years ago | 0

Answered
Simulink Real-Time get Latest Data from UDP Receive Block
Hi Ingomar, If you know the maximum number of messages that can be sent on your network between two consecutive executions of t...

4 years ago | 0

Answered
How can one receive updated values in Simulink Real-time from Workspace.
Hi Gurtej, One thing that comes to mind are the stimulation APIs introduced in MATLAB R2021a. This feature lets you control the...

4 years ago | 0

Answered
Does Speedgoat support a ROS node written in Python?
Hi, To the best of my knowledge, it is currently not possible to deploy Python code directly in Simulink Real-Time. It is howev...

4 years ago | 1

| accepted

Answered
How to import .dat file at 2021a version?
Hi HyeongKeun, In MATLAB R2020b and later, this function is no longer required because the file logging mechanism is not based ...

4 years ago | 0

Answered
### Failed to generate all binary outputs.Hi, I am generating Code for a model in MATLAB 2015b using Simulink and facing the following error. Plz help!
Hi K, The relevant line in your message is the following: ### Using System Target File: c:\Matlab2015b\rtw\c\grt\grt.tlc This...

4 years ago | 0

Answered
Speedgoat ### Failed to generate all binary outputs.
Hi Corantin, The relevant line in your message is the following: c:\users\admin\documents\corantin\speedgoat_can_driver_tmp_gr...

4 years ago | 0

Answered
Speedgoat analog output configuration
Hi Robert, The answer to your question can be found in the Speedgoat documentation here. In short, you can directly feed the de...

4 years ago | 0

Answered
simulink real-time xpctest Test4 falied
This test failure indicates that the Simulink model could not be built. It can be due to a number of reasons, like a missing com...

4 years ago | 0

Answered
How can I test the performance of a simulink model in real-time ?
Hi Sharda, Unfortunately not: the performance in Simulink Real-Time depends on the hardware used, and therefore cannot be predi...

4 years ago | 0

Answered
Simulink Real-Time startup parameter set for a standalone application
Hi Micky, Parameter sets were already supported in MATLAB R2016b according to the documentation (perhaps even earlier). For mor...

4 years ago | 0

| accepted

Answered
Real Time TCP/ip communication
Hi Rui, In order for this example to work, you need a target machine (for instance those made by Speedgoat), on which the real-...

4 years ago | 0

Answered
XPC Target Explorer 2021
Hi Karlee, xPC Target has been replaced by Simulink Real-Time quite some time ago (around 2014, if I'm not mistaken). Simulink ...

4 years ago | 0

| accepted

Answered
How to package the guide interface with Simulink Realtime into an .exe file?
I am not sure whether this is possible with R2015b, but you can export user interfaces created in App Designer in later releases...

4 years ago | 0

Answered
i use a Simulink block function for tcpip communication in which i wrote the code in description but when i run i have an error mesage saying in description
Hi Brian, In case you are using Simulink Real-Time, I'd suggest using the TCP/IP blocks from the Simulink Real-Time library ins...

4 years ago | 0

Answered
Simulink CANopen Blockset/ interface
Hi Lukas, I see you are working with Simulink Real-Time. For this use case, I think the most appropriate way would be to look i...

4 years ago | 0

| accepted

Answered
Simulink Real-Time runs very slow
Hi Martin, I believe the problem comes from a misconfiguration of your model. According to your videos, you're once running it ...

4 years ago | 0

Answered
in custom criteria function of simulink test the test.sltest_output is empty
Hi Stefano, I would recommend logging the data in Simulink Real-Time using the Simuliation Data Inspector (SDI), which would en...

4 years ago | 0

Answered
AXI4 Speedgoat Target Machine Data Streaming
The documentation on this topic has also been vastly improved since 2019, so you should find answers to most of your questions o...

4 years ago | 0

| accepted

Answered
### Unsuccessful Real-Time Workshop build procedure for model
Hi Joe, Have you tried deleting all codegen files and folders, keeping only your model, and starting a fresh build? This often ...

4 years ago | 0

Answered
How can I make obsolete block work in new version Simulink？
Hi Zhisheng, That's correct: support for custom/third-party target hardware has been removed from Simulink Real-Time in R2018a....

4 years ago | 1

| accepted

Answered
AXI4 Speedgoat Target Machine Data Streaming
Hi Eddie, I don't know if this question is still relevant for you, but if yes, would you mind forwarding it to support@speedgoa...

4 years ago | 0

Answered
external simulation, output during simulation
Hi Stefan, Logging and displaying signal values during runtime is definitely possible with Simulink Real-Time. However, this to...

4 years ago | 0

Answered
Logitech G29 Steering Wheel Read Block Error
Hi Jordan, Could be an installation issue... I would recommend submitting a ticket to the MathWorks support team. Best, Dimit...

4 years ago | 1