Graph colour using patch
Show older comments
I want to be able to have a different colour with the points above 0 in the y-axis. Can any one please help! The code is as shown below. Thanks
% Pos = 2
GqrotIS2 = [-0.8479 -0.7562];
% Pos = 3
GqrotIS3 = [-0.7562 -0.05];
% Pos = 4
GqrotIS4 = [-0.8808 -0.0831];
% Pos = 5
GqrotIS5 = [-0.7863 -0.0581];
% Pos = 6
GqrotIS6 = [-21.2861 0.0931];
% Pos = 7
GqrotIS7 = [-22.7203 0.086];
% Pos = 8
GqrotIS8 = [-21.9607 0.0896];
% Pos = 9
GqrotIS9 = [-23.44 0.0823];
% Pos = 10
GqrotIS10 = [-0.8234 -0.0699];
% Pos = 11
GqrotIS11 = [-0.7268 -0.0431];
% Pos = 12
GqrotIS12 = [-0.8556 -0.0787];
% Pos = 13
GqrotIS13 = [-0.7559 -0.0509];
% Pos = 14
GqrotIS14 = [-20.733 0.0934];
% Pos = 15
GqrotIS15 = [-22.1352 0.0864];
% Pos = 16
GqrotIS16 = [-21.3903 0.09];
% Pos = 17
GqrotIS17 = [-22.8366 0.0827];
v = [ -0.8479 -0.7562 -0.8808 -0.7863 -21.2861 -22.7203 -21.9607 -23.44 -0.8234 -0.7268 -0.8556 -0.7559 -20.733 -22.1352 -21.3903 -22.8366; ...%bottom of each element
-0.0742 -0.05 -0.0831 -0.0581 0.0931 0.086 0.0896 0.0823 -0.0699 -0.0431 -0.0787 -0.0509 0.0934 0.0864 0.09 0.0827]; %top of each element
[K,N] = size(v);
assert(K == 2);
assert(N >= 1);
assert(all(diff(v) >= 0))
sq_x = [0; 1; 1; 0; 0];
sq_y = [0; 0; 1; 1; 0];
%%
fig = figure;
ylabel('GQROT Gain')
xlabel ('Position (Flight Conditions)')
patch(sq_x*0.5 + (1:N-1)-0.25, sq_y .* diff(v(:,1:N-1)) + v(1,1:N-1), 'g')
patch(sq_x*0.5 + (13:N)-0.25, sq_y .* diff(v(:,13:N)) + v(1,13:N), 'r')
patch(sq_x*0.5 + (5:N-8)-0.25, sq_y .* diff(v(:,5:N-8)) + v(1,5:N-8), 'r')
%patch(sq_x*0.5 + N-0.25, sq_y .* diff(v(:,N)) + v(1,N), 'g')
set(gca, 'XTick', 1:N)
% legend('0 \in denominator','0 not \in denominator')
Accepted Answer
More Answers (0)
Categories
Find more on Polygons in Help Center and File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!