A problem in the parameters used in simulink model !

I want to know what is the parameter "Batt.kcsat" in the battery model mean to.

There are other parameters that I could identify their meaning from the notations given in the Help file but expect this.

Someone help me please.

[TAB]

Which model you are using ?

Which block in the mode is using this parameter ?

[Raj Shankar]

I am using the power battery model for battery Ni-MH right now.

When you look under the mask of the battery, power_battery. . . . /Model/Continuous, you could see a saturation 2 block.

And double click that. Check the lower limit fcn.

[TAB]

I opened the model power_battery.mdl which is given here also.

But I didn't found any saturation block.

If the model you have is running successfully, all the parameters should be present there either in Base workspace or Model workspace. Have you checked the model workspace ?

[Raj Shankar]

Mr.TAB

Please look under the mask of the battery.

And there you can find a "Model continuous" subsystem block.

Double click that and there you can see 2 saturation blocks. Out of that the second block has this parameter mentioned in a fcn.

[TAB]

OK, I found it.

I don't know what this variable means, but I can tell you where it is calculated.

See my answer in similar thread.