Sir, I tried one code for GFCC and the final matriix is 253x52 but i want 1x52 matrix. and the matrix values are NaN .Why this happening? How to rectify this error?

The code is givenbelow,


[x,fs1]=audioread('cryrumble.wav');
%     ts1=1/fs1;
%     N1=length(x);
%     Tmax1=(N1-1)*ts1;
%     fsu=fs/(N-1);
%     t=(0:ts:Tmax);
%     f=(-fs/2:fsu:fs/2);
%     figure, subplot(411),plot(t,x),xlabel('Time'),title('Original Speech');
%     subplot(412),plot(f,fftshift(abs(fft(x)))),xlabel('Freq (Hz)'),title('Frequency Spectrum');
%       fs2 = (20/441)*fs1;
%   na=resample(audio,2000,44100);
%   N2=length(na);
 ts1=1/fs1;
    N1=length(x);
    Tmax1=(N1-1)*ts1;
    t1=(0:ts1:Tmax1);
    figure;
  plot(t1,x),xlabel('Time'),title('Original audio');
  fs2 = (20/441)*fs1;
 na=resample(x,2000,44100);
%sound(y,fs2);
   ts2=1/fs2;
   N2=length(na);
   Tmax2=(N2-1)*ts2;
   t2=(0:ts2:Tmax2);
   fsu=fs2/(N2-1);
   f=(-fs2/2:fsu:fs2/2);


% Step 1: Pre-Emphasis

a=[1];
    b=[1 -0.95];
    y=filter(b,a,na);
    subplot(413),plot(t2,y),xlabel('Time'),title('Signal After High Pass Filter - Time Domain');
    subplot(414),plot(f,fftshift(abs(fft(y)))),xlabel('Freq (Hz)'),title('Signal After High Pass Filter - Frequency Spectrum');
% Step 2: Frame Blocking

     frameSize=253;

frame_duration=0.025;
frame_len = frame_duration*fs2;
framestep=0.01;
framestep_len=framestep*fs2;
num_frames =floor(N2/frame_len);

frames=[];
for j=1:num_frames
     frame=na((j-1)*framestep_len + 1: ((j-1)*framestep_len)+frame_len);

max_val=max(frame);
   if (max_val>0.025)

        frames=[frames;frame'];
   end
end
% Step 3: Hamming Windowing

NumFrames=size(frames,1);
hamm=hamming(frame_len)';
windowed=[];
    for i=1:NumFrames
    windowed(i,:)=frames(i,:).*hamm;
    end
    % Step 4: FFT 


    for i=1:NumFrames
    ft(i,:)=abs(fft((windowed(i,:)),frame_len));     
    %plot(ft(i,:))
    end
    
%greenwood filterbank
%ftt=padarray(ft,[247,0],0,'post');
filt_num = 52;
kcnst= 253; %nfft
fs=44100;

%elephant sound features between 10hz to 10000hz
fmin= 10;
fmax= 10000;

%A1 and A2 areconstants and x is cochlea position K is cnst equal to 0.88.
greenwoodcnstK= 0.88;
greenwoodcnstA1= fmin/(1-greenwoodcnstK);
greenwoodcnstA2= log10((fmax/greenwoodcnstA1)+greenwoodcnstK);
i=0;
% greenwood frequency
for x = 0 : 0.01 : 1
 i=i+1;
freq_grn(i) = (greenwoodcnstA1)*(10^(greenwoodcnstA2 * x)- (greenwoodcnstK));
end
%perceived frequency 
for f= 10:1:500;
Fp(f)= (1/greenwoodcnstA2)*log10((f/greenwoodcnstA2)+greenwoodcnstK);
end

for i=1:1:filt_num
    f(i)=floor((1024+1)*freq_grn(i)/fs);
end;

% define triangular melbank
for j=2:1:filt_num-1
    for i=1:1:kcnst
        if i<f(j-1)
            h(i,j-1)=0;
        elseif f(j-1)<=i && f(j)>=i
            h(i,j-1)=(i-f(j-1))/(f(j)-f(j-1));
        elseif f(j)<i && f(j+1)>=i
            h(i,j-1)=(f(j+1)-i)/(f(j+1)-f(j));
        else
            h(i,j-1)=0;
        end;
    end;
end;
figure(3);
plot(h);
%hh=padarray(h,[0,7],0,'post');
  for i=1:NumFrames
    for j=1:filt_num
        bankans(i,j)=sum((ft(i,:).*h(j,:)).^2);
    end
  end
    
     %pkg load signal
    %Here logarithm is of base '10'
    logged=log10(bankans);
    for i=1:NumFrames

        gfcc(i,:)=dct2(logged(i,:));
    end
    %plotting the GFCC
    figure 
    hold on
    for i=1:NumFrames
        plot(gfcc(i,1:45));
    end
    hold off
% save c5 mfcc

i= gfcc;
save i i