When a Raspberry Pi™ hardware is directly connected to a computer using an Ethernet cable, perform these steps to access the Internet from the hardware.
Connect the Raspberry Pi hardware to a wireless network.
Open a Secure Shell (SSH) command-line session with the hardware using the IP
169.254.0.2. This is the static IP address
assigned to the hardware during the Hardware Setup
process for direct
r = raspberrypi(‘169.254.0.2’,’pi’,’raspberry’); openShell(r);
pi are the default
user name and password of the Raspberry
From the routing table, delete the default route,
The hardware uses this route to access external hosts.
sudo ip route del 0.0.0.0/0
Check if the hardware is now connected to the Internet by executing the
ping command on the Google® DNS IP address,
188.8.131.52. A successful response
indicates that the hardware is connected to the Internet.