capture

Capture contiguous RF data using Xilinx Zynq-based radio hardware

Add-On Required: This feature requires the SoC Blockset Support Package for AMD FPGA and SoC Devices add-on.

Syntax

[data,mdata] = capture(rx,length)

[data,mdata] = capture(rx,length,unit)

[data,mdata,fn] = capture(___,'Filename',filename)

[data,mdata,fn] = capture(___,'Filename',filename,Name,Value)

Description

[data,mdata] = capture(rx,length) captures ceil(length) number of contiguous data samples using the Xilinx^® Zynq^®-based radio hardware associated with the rx receiver System object™. The function returns the captured data samples in the output data. The function also returns capture-time configuration settings for the radio device in the output mdata.

[data,mdata] = capture(rx,length,unit) specifies the unit value for the capture length. The function converts length units into N samples and returns ceil(N) number of samples.

[data,mdata,fn] = capture(___,'Filename',filename) specifies a file name for the captured data in addition to the input arguments in any of the previous syntaxes. The function saves the captured data and metadata to a baseband file reader file named fn.

[data,mdata,fn] = capture(___,'Filename',filename,Name,Value) specifies options using one or more name-value pair arguments. For example, 'UserMetadata',moreInfo adds the moreInfo structure defined in the workspace to the mdata output. Specify name-value pair arguments after all other input arguments.

Examples

Capture RF Data to Baseband File Using Analog Devices AD9361/AD9364

Record RF signals for post-capture processing in MATLAB®. Save an FM broadcast signal to a file as baseband samples. Read the file containing the recorded signal and demodulate the baseband samples.

Configure SDR Hardware

If your radio hardware is already configured for host-radio communication, skip this section. To configure your radio hardware for host-radio communication, follow the steps in the Set Up AMD FPGA and SoC Devices. Attach an antenna suitable for the 88–108 MHz band to the first RX channel.

Configure Receiver System Object

Create a receiver System object with the specified properties. The specified center frequency corresponds to a local FM station. If you have an FMCOMMS5 radio hardware, set deviceName to 'FMCOMMS5'.

stationCenterFrequency = 95e6;
deviceName = 'AD936x';
rx = sdrrx(deviceName,'BasebandSampleRate',528e3,...
    'CenterFrequency',stationCenterFrequency,'OutputDataType','Double');

Initiate Data Capture to File

Call the capture function, specifying the receiver object, a capture duration, and a file name. The function returns the captured data in a file named "FMRecording.bb". After capturing the FM signal, unlock the receiver object by using the release function.

capture(rx,5,'Seconds','Filename','FMRecording.bb');

## Establishing connection to hardware. This process can take several seconds.

release(rx);

Demodulate FM Recording

Create a comm.BasebandFileReader (Communications Toolbox) System object to read the captured signal and extract frames of data from the file. Set the baseband file reader to take 4400 samples per frame when reading the saved baseband signal.

bbr = comm.BasebandFileReader('FMRecording.bb');
bbr.SamplesPerFrame = 4400;

Use the BasebandSampleRate field of the baseband file reader object to set the SampleRate property of the demodulator. You can find the BasebandSampleRate field in the MetaData structure. Create a comm.FMBroadcastDemodulator (Communications Toolbox) System object. Demodulate and play back each frame of the FM data. Use a while loop to read all frames of the captured data.

fmbDemod = comm.FMBroadcastDemodulator( ...
    'AudioSampleRate', 48e3, ...
    'SampleRate',bbr.Metadata.BasebandSampleRate,'PlaySound',true);

while ~isDone(bbr)
    fmbDemod(bbr());
end

Input Arguments

rx — Receiver

comm.SDRRxAD936x System object | comm.SDRRxFMCOMMS5 System object

Receiver, specified as a comm.SDRRxAD936x or comm.SDRRxFMCOMMS5 System object. To create these objects, use the sdrrx function.

length — Capture duration

numeric scalar

Capture duration, specified as a numeric scalar. The input argument unit specifies the unit of length. The default unit is samples of data. The maximum number of samples to capture depends on the input receiver rx.

• If rx is a comm.SDRRxAD936x System object, the number of samples must be in the range [1, 16,777,216].

• If rx is a comm.SDRRxFMCOMMS5 System object, the number of samples must be in the range [1, 33,554,432].

You can remove the limit on the maximum number of samples to capture at the cost of guaranteed data contiguity. For more details, see the 'EnableOversizeCapture' name-value pair argument.

Data Types: double

unit — Capture duration unit

'Samples' (default) | 'Seconds'

Capture duration unit, specified as one of these values:

• 'Samples' — The function returns ceil(length) number of samples.

• 'Seconds' — The function converts length seconds into N samples, based on the BasebandSampleRate property of input receiver rx, and returns ceil(N) number of samples.

filename — File name for saving captured data

character vector | string scalar

File name for saving captured data as a file, specified as a character vector or string scalar. The saved file has the file name extension .bb. To read this file, use the comm.BasebandFileReader (Communications Toolbox) System object.

Example: 'rxdata' or 'rxdata.bb' configures the function to save data to a file named rxdata.bb.

Data Types: char | string

Name-Value Arguments

Specify optional pairs of arguments as Name1=Value1,...,NameN=ValueN, where Name is the argument name and Value is the corresponding value. Name-value arguments must appear after other arguments, but the order of the pairs does not matter.

Before R2021a, use commas to separate each name and value, and enclose Name in quotes.

Example: 'Timestamp',true appends a timestamp to the file name of the captured data.

Timestamp — Append capture timestamp to saved file name

false (default) | true

Append a capture timestamp to the saved file name, specified as the comma separated pair consisting of 'Timestamp' and false or true.

• When you specify false, no timestamp is appended to the saved file name.

• When you specify true, the name of the created file takes the form filename_<Year-Month-Day>_<Hour-Minute-Second-Millisecond>.bb, indicating when the data was captured.

Data Types: logical

UserMetadata — User data

structure

User data, specified as the comma separated pair consisting of 'UserMetadata' and a single-level structure of data. The function adds this data to the mdata structure output. By default, the function includes no user data in mdata.

Data Types: struct

EnableOversizeCapture — Remove limit on capture duration

false (default) | true

Remove limit on capture duration, specified as the comma separated pair consisting of 'EnableOversizeCapture' and false or true. When you specify true, the function removes the limit on the number of samples and data contiguity is not guaranteed.

Data Types: logical

Output Arguments

data — Output signal

complex matrix

Output signal received from the radio hardware, returned as a complex matrix. The number of columns in the matrix depends on the number of channels in use, as specified by the ChannelMapping property of input receiver rx. Each column corresponds to a channel of complex data received on one channel.

The output signal supports complex values with these data types:

• 16-bit signed integers — Complex values are the raw 16-bit I and Q samples from the board. The 12-bit value from the ADC of the AD9361/AD9364 RF chip is sign-extended to 16 bits.

• Single-precision floating point — Complex values are scaled to the range of [–0.0625, 0.0625]. The object derives this value from the sign-extended 16 bits received from the board.

• Double-precision floating point — Complex values are scaled to the range of [–0.0625, 0.0625]. The object derives this value from the sign-extended 16 bits received from the board.

To specify the base data type, use the OutputDataType property of input receiver rx.

Data Types: int16 | single | double
Complex Number Support: Yes

mdata — Capture-time configuration settings for radio device

structure

Capture-time configuration settings for the radio device, returned as a structure that contains these fields:

Field	Description
Date	Date of the data capture
BasebandSampleRate	Baseband sample rate, in Hz, configured in the SDR device
CenterFrequency	Center frequency, in Hz, configured in the SDR device
DeviceName	Name of the SDR device
ChannelMapping	Channel mapping value configured in the SDR device Channel mapping is always 1
CaptureLengthSamples	Length of data capture, as specified by inputs length and unit, in samples
CaptureLengthSeconds	Length of data capture, as specified by inputs length and unit, in seconds
SDRReceiverConfiguration	Character vector list of property values and settings that describe the System object state
GainSource	Gain source value configured in the SDR device
DataContiguity	0 indicates discontiguous data. 1 indicates contiguous data.
DiscontiguityIndices	Vector of row indices into the output data This field only applies when the DataContiguity field is 0. Each index indicates that on or after the corresponding data sample a discontiguity occurs.
UserMetaData	Additional structure containing user-defined information included as an input to the capture function

Data Types: struct

fn — File name for saved captured data and metadata

character vector

File name for saved captured data and metadata, returned as a character vector.

Data Types: char

Version History

Introduced in R2019b