Simulink.sdi.getNumCursors

R2026b

Check number of cursors active in the Simulation Data Inspector

collapse all in page

    Syntax

    num = Simulink.sdi.getNumCursors
    num = Simulink.sdi.getNumCursors(view)

    Description

    num = Simulink.sdi.getNumCursors returns the number of active cursors in the Inspect pane across all Simulation Data Inspector tabs.

    num = Simulink.sdi.getNumCursors(view) returns the number of active cursors in the Inspect or Compare pane of the Simulation Data Inspector, as specified by view.

    example

    Examples

    collapse all

    You can use the Simulation Data Inspector programmatic interface to specify the position of cursors on time plots or sparklines and to access the time that corresponds to the current cursor position.

    Suppose you want to know the signal values 5 seconds into the simulation. Use the Simulink.sdi.setCursorPositions function to move the cursor to 5 on the time axis and read the signal values from the cursor on each subplot. The asterisk next to the value in the cursor label indicates that the value is interpolated because the simulation did not include a calculation for a simulation time of exactly 5 seconds.

    Simulink.sdi.setCursorPositions(Left=5);

    Subplots of x1 on the top and x2 on the bottom showing the data cursor at 5 seconds.

    Suppose you want to calculate the time between two peaks in the x2 signal. Add a second cursor using the Simulink.sdi.setNumCursors function or by using Show/hide data cursors in the Simulation Data Inspector. 

    Simulink.sdi.setNumCursors(2);

    Drag the cursors so the left cursor is positioned at the first peak in the x2 signal and the right cursor is positioned at the second peak. Alternatively, you can run this code that positions the cursors for you.

    Simulink.sdi.setCursorPositions(Left=5.921998549931304,...
    Right=12.378442136906246);

    Subplots of x1 on the top and x2 on the bottom with two cursors.

    The Simulation Data Inspector displays the difference between the two cursors in seconds. However, the cursor position and difference values are both rounded. Use the Simulink.sdi.getCursorPositions function to programmatically retrieve the exact time values that correspond to the cursor positions. Then, compute the difference between the times.

    [t1,t2] = Simulink.sdi.getCursorPositions;
T = t2 - t1
    T = 6.4564

    Input Arguments

    collapse all

    Plot area for which to return number of active cursors, specified as 'inspect' or 'compare'.

    Data Types: char | string

    Output Arguments

    collapse all

    Number of active cursors, returned as 0, 1, or 2.

    Version History

    Introduced in R2021a

    See Also

    Functions

    Topics