Main Content

Enable HDL DUT input port generation for tunable parameters

Enable creation of DUT input ports for tunable parameters

Since R2021b

Model Configuration Pane: Global Settings / Ports

Description

Disable this setting to prevent creation of DUT input ports for tunable parameters in the generated HDL code.

Settings

on (default) | off

Default: On

on

The code generator creates DUT input ports for the tunable parameters signals in the generated HDL code.

off

The code generator preserves the tunable parameters and does not create DUT input ports in the generated HDL code. Selecting off might speed up code generation.

Tips

To set this property, use the functions hdlset_param or makehdl. To view the property value, use the function hdlget_param.

For example, after you designate signals as tunable parameters for the sfir_fixed/symmetric_fir DUT subsystem, to generate DUT input ports in the HDL code, use either of these methods:

  • Pass the property as an argument to the makehdl function.

    makehdl ('sfir_fixed/symmetric_sfir','GenDUTPortForTunableParam','on')

  • When you use hdlset_param, you can set the parameter on the model, and then generate HDL code by using makehdl.

    hdlset_param('sfir_fixed','GenDUTPortForTunableParam','on')
makehdl('sfir_fixed/symmetric_fir')

Recommended Settings

No recommended settings.

Programmatic Use

Parameter: GenDUTPortForTunableParam
Type: character vector
Value: 'on' | 'off'
Default: 'on'

Version History

Introduced in R2021b

See Also