Digital Port Write

Set GPIO pin(s) status

Since R2024a

• 

Libraries:
Embedded Coder Support Package for Infineon AURIX TC3x Microcontrollers / AURIX TC3x

Description

Write logical status of pins of a GPIO port for the Infineon AURIX TC3x Microcontrollers.

Ports

Input

Pin(s) — Status of GPIO pin(s)

scalar | vector

Specify a value at this port to set the status of GPIO pin(s). You can specify a non-negative scalar or a vector of non-negative elements.

• Specify 0 to set the pin(s) to a low value.

• Specify a nonzero value to set the pin(s) to a high value.

The size of input ports available depends on the Number of pins parameter.

Data Types: single | double | int8 | int16 | int32 | uint8 | uint16 | uint32 | Boolean

Output

sig — Simulink based simulation signal

scalar | vector

This port outputs the data received at the input port during simulation.

Dependencies

To view this port, select the Enable simulation port parameter.

Parameters

Number of pins — Number of pins you want to configure

1 (default) | 2 | 3 | ...

Select the number of pins (1 to 15) whose output you want to configure in the block.

Enable simulation port — Enable peripheral simulation ports in the block

off (default) | on

Select this parameter to enable peripheral simulation capability.

Version History

Introduced in R2024a