# padsequences

## Syntax

## Description

pads the sequences in the cell array `XPad`

= padsequences(`X`

,`paddingDim`

)`X`

along the dimension specified by
`paddingDim`

. The function adds padding at the end of each sequence to
match the size of the longest sequence in `X`

. The padded sequences are
concatenated and the function returns `XPad`

as an array.

`[`

additionally returns a logical array representing the positions of original sequence data in
`XPad`

,`mask`

] = padsequences(`X`

,`paddingDim`

)`XPad`

. The position of values of `true`

or
`1`

in `mask`

correspond to the positions of original
sequence data in `XPad`

; values of `false`

or
`0`

correspond to padded values.

`[___] = padsequences(`

specifies options using one or more name-value arguments in addition to the input and output
arguments in previous syntaxes. For example, `X`

,`paddingDim`

,`Name,Value`

)`'PaddingValue','left'`

adds
padding to the beginning of the original sequence.

## Examples

### Pad Sequence Data to Same Length

Pad sequence data ready for training.

Load the sequence data and view the sizes of the first few sequences. The sequences have different lengths.

```
load WaveformData
data(1:5)
```

`ans=`*5×1 cell array*
{103x3 double}
{136x3 double}
{140x3 double}
{124x3 double}
{127x3 double}

Pad the data with zeros to the same length as the longest sequence. The function applies on the right side of the data. Specify the dimension containing the time steps as the padding dimension. For this example, the dimension is `1`

.

dataPadded = padsequences(data,1);

Examine the size of the padded sequences.

size(dataPadded)

`ans = `*1×3*
200 3 1000

### Pad or Truncate Both Sides of Sequence Data

Use `padsequences`

to extend or cut each sequence to a fixed length by adding or removing data at both ends of the sequence, depending on the length of the original sequence.

Load the sequence data.

`load WaveformData`

View the sizes of the first few sequences. The sequences have different lengths.

data(1:10)

`ans=`*10×1 cell array*
{103x3 double}
{136x3 double}
{140x3 double}
{124x3 double}
{127x3 double}
{200x3 double}
{141x3 double}
{151x3 double}
{149x3 double}
{112x3 double}

Process the data so that each sequence is exactly 128 time steps. For shorter sequences, padding is required, while longer sequences need to be truncated. Pad or truncate at both sides of the data. For the padded sequences, apply symmetric padding so that the padded values are mirror reflections of the original sequence values.

[dataPadded,mask] = padsequences(data,1,'Length',128,'Direction','both','PaddingValue','symmetric');

Compare some of the padded sequences with the original sequence. Each observation contains 12 features so extract a single feature to compare.

View the size of the first observation. This sequence is shorter than 128 time steps.

idx = 1; size(data{idx})

`ans = `*1×2*
103 3

View the size of the padded array.

size(dataPadded)

`ans = `*1×3*
128 3 1000

The function centers the sequence and pads at both ends by reflecting the values at the ends of the sequence. The mask shows the location of the original sequence values. View the first and last few time steps of the mask.

mask(1:20,1,idx)

`ans = `*20x1 logical array*
0
0
0
0
0
0
0
0
0
0
⋮

mask(end-19:end,1,idx)

`ans = `*20x1 logical array*
1
1
1
1
1
1
1
0
0
0
⋮

View the size of the third observation. This sequence is longer than 128 time steps.

idx = 3; size(data{idx})

`ans = `*1×2*
140 3

The function centers the sequence and truncates at both ends. The mask shows that all data in the resulting sequence is part of the original sequence. View the first and last few time steps of the mask.

mask(1:20,1,idx)

`ans = `*20x1 logical array*
1
1
1
1
1
1
1
1
1
1
⋮

mask(end-19:end,1,idx)

`ans = `*20x1 logical array*
1
1
1
1
1
1
1
1
1
1
⋮

### Pad Mini-Batches of Sequences for Custom Training Loop

Use the `padsequences`

function in conjunction with `minibatchqueue`

to prepare and preprocess sequence data ready for training using a custom training loop.

The example uses the human activity recognition training data. The data contains six time series of sensor data obtained from a smartphone worn on the body. Each sequence has three features and varies in length. The three features correspond to the accelerometer readings in three different directions.

Load the training data. Combine the data and labels into a single datastore.

s = load("HumanActivityTrain.mat"); dsXTrain = arrayDatastore(s.XTrain,'OutputType','same'); dsYTrain = arrayDatastore(s.YTrain,'OutputType','same'); dsTrain = combine(dsXTrain,dsYTrain);

Use `minibatchqueue`

to process the mini-batches of sequence data. Define a custom mini-batch preprocessing function `preprocessMiniBatch`

(defined at the end of this example) to pad the sequence data and labels, and one-hot encode the label sequences. To also return the mask of the padded data, specify three output variables for the `minibatchqueue`

object.

miniBatchSize = 2; mbq = minibatchqueue(dsTrain,3,... 'MiniBatchSize',miniBatchSize,... 'MiniBatchFcn', @preprocessMiniBatch);

Check the size of the mini-batches.

[X,Y,mask] = next(mbq); size(X)

`ans = `*1×3*
3 64480 2

size(mask)

`ans = `*1×3*
3 64480 2

Each mini-batch has two observations. The function pads the sequences to the same size as the longest sequence in the mini-batch. The mask is the same size as the padded sequences, and shows the location of the original data values in the padded sequence data.

size(Y)

`ans = `*1×3*
5 64480 2

The padded labels are one-hot encoded into numeric data ready for training.

function [xPad,yPad,mask] = preprocessMiniBatch(X,Y) [xPad,mask] = padsequences(X,2); yPad = padsequences(Y,2); yPad = onehotencode(yPad,1); end

## Input Arguments

`X`

— Sequences to pad

cell vector

Sequences to pad, specified as a cell vector of numeric or categorical arrays.

**Data Types: **`cell`

`paddingDim`

— Dimension along which to pad

positive integer

Dimension along which to pad input sequence data, specified as a positive integer.

**Example: **`2`

**Data Types: **`single`

| `double`

| `int8`

| `int16`

| `int32`

| `int64`

| `uint8`

| `uint16`

| `uint32`

| `uint64`

### Name-Value Arguments

Specify optional pairs of arguments as
`Name1=Value1,...,NameN=ValueN`

, where `Name`

is
the argument name and `Value`

is the corresponding value.
Name-value arguments must appear after other arguments, but the order of the
pairs does not matter.

*
Before R2021a, use commas to separate each name and value, and enclose*
`Name`

*in quotes.*

**Example: **`padsequences(X,'Length','shortest','Direction','both')`

truncates the sequences at each end, to match the length of the shortest input
sequence.

`Length`

— Length of padded sequences

`'longest'`

(default) | `'shortest'`

| positive integer

Length of padded sequences, specified as one of the following:

`'longest'`

— Pad each input sequence to the same length as the longest input sequence.`'shortest'`

— Truncate each input sequence to the same length as the shortest input sequence.Positive integer — Pad or truncate each input sequence to the specified length.

**Example: **`padsequences(X,'Length','shortest')`

**Data Types: **`single`

| `double`

| `int8`

| `int16`

| `int32`

| `int64`

| `uint8`

| `uint16`

| `uint32`

| `uint64`

| `char`

| `string`

`Direction`

— Direction of padding or truncation

`'right'`

(default) | `'left'`

| `'both'`

Direction of padding or truncation, specified as one of the following:

`'right'`

— Pad or truncate at the end of each original sequence.`'left'`

— Pad or truncate at the beginning of each original sequence.`'both'`

— Pad or truncate at the beginning and end of each original sequence. Half the required padding or truncation is applied to each end of the sequence.

**Example: **`padsequences(X,'Direction','both')`

**Data Types: **`char`

| `string`

`PaddingValue`

— Value used to pad input

`'auto'`

(default) | `'symmetric'`

| numeric scalar | categorical scalar

Value used to pad input, specified as one of the following:

`'auto'`

— Determine the padding value automatically depending on the data type of the input sequences. Numeric sequences are padded with`0`

. Categorical sequences are padded with`<undefined>`

.`'symmetric'`

— Pad each sequence with a mirror reflection of itself.Numeric scalar — Pad each sequence with the specified numeric value.

Categorical scalar — Pad each sequence with the specified categorical value.

**Example: **`padsequences(X,'PaddingValue','symmetric')`

**Data Types: **`single`

| `double`

| `int8`

| `int16`

| `int32`

| `int64`

| `uint8`

| `uint16`

| `uint32`

| `uint64`

| `categorical`

`UniformOutput`

— Flag to return padded data as uniform array

`true`

or `1`

(default) | `false`

or `0`

Flag to return padded data as a uniform array, specified as a numeric or logical
`1`

(`true`

) or `0`

(`false`

). When you set the value to `0`

,
`XPad`

is returned as a cell vector with the same size and
underlying data type as the input `X`

.

**Example: **`padsequences(X,'UniformOutput',0)`

**Data Types: **`single`

| `double`

| `int8`

| `int16`

| `int32`

| `int64`

| `uint8`

| `uint16`

| `uint32`

| `uint64`

| `logical`

## Output Arguments

`XPad`

— Padded sequence data

numeric array | categorical array | cell vector

Padded sequence data, returned as a numeric array, categorical array, or a cell vector of numeric or categorical arrays.

If you set the `UniformOutput`

name-value option to
`true`

or `1`

, the function concatenates the padded
sequences over the last dimension. The last dimension of `XPad`

has
the same size as the number of sequences in input `X`

.
`XPad`

is an array with `N`

+ `1`

dimensions, where `N`

is the number of dimensions of the sequence
arrays in `X`

. `XPad`

has the same data type as
the arrays in input `X`

.

If you set the `UniformOutput`

name-value option to
`false`

or `0`

, the function returns the padded
sequences as a cell vector with the same size and underlying data type as the input
`X`

.

`mask`

— Position of original sequence data

logical array | cell vector

Position of original sequence data in the padded sequences, returned as a logical array or as a cell vector of logical arrays.

`mask`

has the same size and data type as
`XPad`

. Values of `1`

in `mask`

correspond to positions of original sequence values in `XPad`

. Values
of `0`

correspond to padded values.

Use `mask`

to excluded padded values from loss calculations using
the `"Mask"`

name-value option in the `crossentropy`

function.

## Version History

**Introduced in R2021a**

## MATLAB Command

You clicked a link that corresponds to this MATLAB command:

Run the command by entering it in the MATLAB Command Window. Web browsers do not support MATLAB commands.

Select a Web Site

Choose a web site to get translated content where available and see local events and offers. Based on your location, we recommend that you select: .

You can also select a web site from the following list:

## How to Get Best Site Performance

Select the China site (in Chinese or English) for best site performance. Other MathWorks country sites are not optimized for visits from your location.

### Americas

- América Latina (Español)
- Canada (English)
- United States (English)

### Europe

- Belgium (English)
- Denmark (English)
- Deutschland (Deutsch)
- España (Español)
- Finland (English)
- France (Français)
- Ireland (English)
- Italia (Italiano)
- Luxembourg (English)

- Netherlands (English)
- Norway (English)
- Österreich (Deutsch)
- Portugal (English)
- Sweden (English)
- Switzerland
- United Kingdom (English)