Standards-Based Modeling
Your SDR can transmit and receive signals compliant with various standards. Use Communications Toolbox™ to generate and recover various over-the-air waveforms.
Topics
5G
- 5G NR Synchronization Signal Capture Using Software-Defined Radio (5G Toolbox)
Use a software-defined radio to capture an SS burst. Analyze the capture and identify the strongest SSB. (Since R2024a) - 5G NR Waveform Capture and Analysis Using Software-Defined Radio (5G Toolbox)
Generate and transmit a 5G NR waveform continuously over the air using a supported software-defined radio.
ADS-B and AIS
- Ship Tracking Using AIS Signals
Track ships by processing automatic identification system (AIS) signals, using either previously captured signals or real-time reception with an RTL-SDR, ADALM-PLUTO, or USRP™ radio, and display the tracked ships on a map with the Mapping Toolbox™. - Airplane Tracking Using ADS-B Signals
Track planes by processing automatic dependent surveillance-broadcast (ADS-B) signals, using either previously captured signals or real-time reception with an RTL-SDR, ADALM-PLUTO, or USRP radio, and visualize them on a map with the Mapping Toolbox. - Airplane Tracking Using ADS-B Signals in Simulink
Track planes by processing automatic dependent surveillance-broadcast (ADS-B) signals, using either previously captured signals or real-time reception with an RTL-SDR, ADALM-PLUTO, or USRP radio, and visualize them on a map with the Mapping Toolbox.
FM
- FM Broadcast Receiver
Build an FM mono or stereo receiver using recorded data or real-time signals with an RTL-SDR, ADALM-PLUTO, or USRP radio. - FM Broadcast Receiver in Simulink
Build an FM mono or stereo receiver using recorded data or real-time signals with an RTL-SDR, ADALM-PLUTO, or USRP radio. - RDS/RBDS and RadioText Plus (RT+) FM Receiver
Extract program or song information from FM radio stations using RDS or RBDS, and optionally RT+, standards by processing previously captured signals or receiving over-the-air signals in real time with an RTL-SDR, ADALM-PLUTO, or USRP radio. - RDS/RBDS and RadioText Plus (RT+) FM Receiver in Simulink
Extract program or song information from FM radio stations using RDS or RBDS, and optionally RT+, standards by processing previously captured signals or receiving over-the-air signals in real time with an RTL-SDR, ADALM-PLUTO, or USRP radio.
LTE
- LTE Transmitter Using Software Defined Radio (LTE Toolbox)
This example shows how to generate a reference measurement channel (RMC) downlink (DL) LTE waveform suitable for over-the-air transmission. - LTE Receiver Using Software-Defined Radio (LTE Toolbox)
This example shows how to recover the master information block (MIB) and basic system information from an over-the-air LTE downlink (DL) waveform. - Scan and Decode LTE Waveform (LTE Toolbox)
This example shows how to capture and decode an LTE signal obtained either from a file or from radio by using LTE Toolbox™ software and various hardware support packages (HSPs).
Satellite Communication
- DVB-S2 Transmitter Using Software-Defined Radio (Satellite Communications Toolbox)
Generate DVB-S2 PL frames and transmit them using SDR. - DVB-S2 Receiver Using Software-Defined Radio (Satellite Communications Toolbox)
Capture DVB-S2 waveform using SDR.
WLAN
- WLAN Beacon Receiver Using Software-Defined Radio (WLAN Toolbox)
Retrieve information about WiFi networks on the 5 GHz band using a software-defined radio. - Recover and Analyze Packets in 802.11 Waveform (WLAN Toolbox)
Blindly detect, decode, and analyze IEEE® 802.11™ packets in a waveform. - Detect Human Presence Using Wireless Sensing with Deep Learning (WLAN Toolbox)
Perform wireless sensing to detect human presence using a CNN and the channel state information in wireless local area networks.
Featured Examples
FM Broadcast Receiver
Build an FM mono or stereo receiver using recorded data or real-time signals with an RTL-SDR, ADALM-PLUTO, or USRP radio.
FM Broadcast Receiver in Simulink
Build an FM mono or stereo receiver using recorded data or real-time signals with an RTL-SDR, ADALM-PLUTO, or USRP radio.
RDS/RBDS and RadioText Plus (RT+) FM Receiver
Extract program or song information from FM radio stations using RDS or RBDS, and optionally RT+, standards by processing previously captured signals or receiving over-the-air signals in real time with an RTL-SDR, ADALM-PLUTO, or USRP radio.
RDS/RBDS and RadioText Plus (RT+) FM Receiver in Simulink
Extract program or song information from FM radio stations using RDS or RBDS, and optionally RT+, standards by processing previously captured signals or receiving over-the-air signals in real time with an RTL-SDR, ADALM-PLUTO, or USRP radio.
Ship Tracking Using AIS Signals
Track ships by processing automatic identification system (AIS) signals, using either previously captured signals or real-time reception with an RTL-SDR, ADALM-PLUTO, or USRP radio, and display the tracked ships on a map with the Mapping Toolbox.
Airplane Tracking Using ADS-B Signals
Track planes by processing automatic dependent surveillance-broadcast (ADS-B) signals, using either previously captured signals or real-time reception with an RTL-SDR, ADALM-PLUTO, or USRP radio, and visualize them on a map with the Mapping Toolbox.
Airplane Tracking Using ADS-B Signals in Simulink
Track planes by processing automatic dependent surveillance-broadcast (ADS-B) signals, using either previously captured signals or real-time reception with an RTL-SDR, ADALM-PLUTO, or USRP radio, and visualize them on a map with the Mapping Toolbox.
