The Powertrain Blockset™ includes blocks for 1DOF and 3DOF vehicle motion. The driving scenario blocks allow you to specify a drive cycle and driver commands. Use the vehicle blocks in fuel economy studies and drive cycle analysis.
Use the Virtual Vehicle Composer app to configure and build a virtual vehicle that you can use for system-level performance analysis, including component sizing, fuel economy, and drive cycle tracking. To get started with your virtual vehicle, see Get Started with the Virtual Vehicle Composer.
|Virtual Vehicle Composer
|Configure, build, and analyze a virtual automotive vehicle (Since R2022a)
|Vehicle Body 1DOF Longitudinal
|Two-axle vehicle in forward and reverse motion
|Vehicle Body 3DOF Longitudinal
|3DOF rigid vehicle body to calculate longitudinal, vertical, and pitch motion
|Vehicle Body Total Road Load
|Vehicle motion using coast-down testing coefficients
|Implement motorcycle chain (Since R2021b)
|Motorcycle Body Longitudinal In-Plane
|Longitudinal in-plane motorcycle vehicle motion (Since R2021b)
MDF File - Reading
|Access or create MDF-file metadata (Since R2019b)
|Get channel group metadata from MDF-file (Since R2023a)
|Get channel metadata from MDF-file (Since R2023a)
|Read channel data from MDF-file (Since R2023a)
|Save embedded attachment files from MDF-file (Since R2023a)
|Sort MDF-file by ASAM standards (Since R2019b)
|Finalize MDF-file by ASAM standards (Since R2021b)
|View channel data from MDF-file (Since R2019a)
MDF File - Writing
|Create MDF-file with metadata (Since R2022a)
|Write timetable data to MDF-file (Since R2022a)
|Add channel group and channel metadata to timetable (Since R2022a)
|Attach file to MDF-file (Since R2022a)
|Remove attachment from MDF-file (Since R2022a)
MDF File - Object Interface
|Datastore for collection of MDF-files
|Read data in MDF datastore
|Read all data in MDF datastore
|Subset of data from MDF datastore
|Reset MDF datastore to initial state
|Determine if data is available to read from MDF datastore
|Partition MDF datastore
|Number of partitions for MDF datastore
- Get Started with the Virtual Vehicle Composer
Use the Virtual Vehicle Composer app to configure, build, and analyze a virtual vehicle.
- Calibrate Mapped CI Engine Using Data
Use the Virtual Vehicle Composer to calibrate mapped CI engines from imported data.
- Calibrate Mapped SI Engine Using Data
Use the Virtual Vehicle Composer to calibrate mapped SI engines from imported data.
- Calibrate Mapped Electric Motors Using Data
Use the Virtual Vehicle Composer to calibrate mapped electric motors from imported data.
- Calibrate Mapped DC-to-DC Converters Using Data
Use the Virtual Vehicle Composer to calibrate mapped DC-to-DC converters from imported data.
- Install Drive Cycle Data
Install drive cycle data for the Drive Cycle Source block from a support package.
- Resize Engines and Mapped Motors
Resize engines and mapped motors using the Virtual Vehicle Composer app.
- Track Drive Cycle Errors
Use the Drive Cycle Source blocks to identify drive cycle faults.