Vector CAN Interface Support from Vehicle Network Toolbox

Use Vector CAN devices to stream CAN bus data into MATLAB and Simulink.

Vehicle Network Toolbox™ supports Vector CAN interface hardware using the latest version of the Vector XL Driver library. The table below lists the hardware supported by the latest release of Vehicle Network Toolbox.

With the Vector CAN interface support, you can perform the following tasks in MATLAB® or Simulink®:

  • Transmit and receive CAN and XCP messages
  • Pack and unpack CAN messages for simplified decoding and encoding
  • Filter, log, and replay CAN messages
  • Use .dbc database and A2L description files
  • Find and display CAN interface device settings

In MATLAB and Simulink, you can transmit and receive CAN messages using the CAN FD standard if the CAN interface hardware supports CAN FD.

If you do not see your specific hardware device listed below, please click the Request Hardware Support button at the bottom of the page. For detailed information about a board listed here, visit the Vector web site.

Bus/Form Factor Product Name
ExpressCard CANcardXLe
PCI CANboardXL
PCI Express CANboardXL PCIe
  VN7572 (CAN/ CAN FD only)
PCMCIA CANcardXL
  CANcardX
PXI CANboardXL PXI
USB CANcaseXL
  CANcaseXL log
  VN1600 Series
  VN1610
  VN1611
  VN1630A (CAN/ CAN FD only)
  VN1630 log (CAN/ CAN FD only)
  VN1640A (CAN/ CAN FD only)
  VN5610A (CAN/ CAN FD only)
  VN5640 (CAN/ CAN FD only)
  VN7600 Series
  VN7610 (CAN/ CAN FD only)
  VN7640 (CAN/ CAN FD only)
  VN8900 (CAN/ CAN FD only)
  VX0312 (CAN/ CAN FD only)

Platform and Release Support

See the hardware support package system requirements table for current and prior version, release, and platform availability.

Related Hardware Support Views: Aerospace and Defense, Automotive, CAN, Embedded Systems, Industrial Automation and Machinery, MathWorks Supported, MATLAB Product Family, Support Package Installer Enabled, Test and Measurement, USB, Vector, Vehicle Network Toolbox

Ready to install?

Before installing the support package, confirm you have the correct setup. View system requirements and installation options.

Get support package

Software

Required

Recommended

Support Package

Required

Support Package Installer installs this support package. To start the installer, go to the MATLAB toolstrip and click Add-Ons > Get Hardware Support Packages. For more information, read the documentation.

Get support package

Hardware

Required

  • Any Vector CAN interface hardware from the list above

Support Package

Required

All required third-party software is installed by the Support Package Installer.

Don't see the hardware you're looking for?

Request new hardware support