Answered
How do I start the Synchronous Machine from rest in SimPowerSystems?
https://www.mathworks.com/help/physmod/sps/ug/starting-a-synchronous-motor.html

4 years ago | 0

Answered
how can i measure the Excitation voltage of synchronous machine in SI system from the Synchronous machine model used in Matlab?
Please use this block: https://www.mathworks.com/help/physmod/sps/powersys/ref/synchronousmachinesifundamental.html You can des...

4 years ago | 0

Answered
How can I change windfarm simulink model so it would work with base speed of 14m/s?
This answer is part of a cleanup effort and is unfortunately provided too late to be of use for the asker, apologies. When I go...

4 years ago | 0

Answered
Simulink: Error: Unable to load a message catalog 'physmod:powersys:powersys'
This is part of an effort to clean up Matlab Answers, unfortunately this answer is too late for the asker: This is a very real ...

4 years ago | 0

Answered
How to detect disturbance ?
This is being answered as part of an effort to clean up Matlab Answers. Unfortunately this answer comes too late to be useful t...

4 years ago | 0

Answered
Please help me in power electronics ? My Question is how save charges from solar and wind generation using BATTERY ? please Help me ?
I am pasting the comments into the answer section as an effort to clean up unanswered questions reported in matlab answers: Dr....

4 years ago | 0

Answered
No Nominal voltage and Power settings in PMSM block of SimPower systems
This answer is too late for the asker but is being updated as part of an effort to clean up Matlab Answers: unfortunately, ther...

4 years ago | 0

Answered
Problem with Section 7.1 Task 5 of Simscape onramp
I am pasting Lianna's comment here as it is the solution. Lianna Cubias on 7 Aug 2021 at 9:16 Figured it out! Finally! Do tas...

4 years ago | 6

| accepted

Answered
Stop Time and Sample time for best performance
Hello Mohamadreza, the default stop time is 10 seconds. You can set this time to anything you want. Your stop time is directl...

4 years ago | 0

Answered
parallel lithium ion cells charge and discharge
This is part of an effort to clean up Matlab answers and unfortunately is too late to be useful to the asker. Yes, simscape can...

4 years ago | 0

Answered
Asynchronous Machine
Hello, This is an answer as part of an effor to clean up matlab answers. I realize this is too late to be useful to the asker....

4 years ago | 0

Answered
How can I speed up a model which contains 4 Fuzzy logic Controllers
This answer is coming in regards to an effort to clean up matlab answers as this response is far too late to be of use to the as...

4 years ago | 0

Answered
Three-Phase PI Section Line Parameters
Hello, as part of an effor to clean up matlab answers, this response is being made even though it is far too late to be of use ...

4 years ago | 0

Answered
How to specify initial voltage or current of a series RLC branch when using power_statepace command?
Hello, I realize this answer is too late for the asker, but as part of a cleanup effort, I will be answering this question: Th...

4 years ago | 0

Answered
High Losses with Parallel Transformers
Hello, I realize it is too late to for this answer to be useful for the asker, but as part of a Matlab Answers cleanup effort, ...

4 years ago | 0

Answered
Ready-made modules for PWM Control of a 3-phase Rectifier
Hello, I realize this question is being answered too late to be of any use to the asker. For other people's reference, here are...

4 years ago | 0

Answered
Choose discretization method with discrete simpowersystem simulation
I realize this question is being answered too late to be of use to the asker, but as part of an effort to clean up matlab answer...

4 years ago | 0

Answered
Modelling 3-phase sources by power and connecting together - SimPowerSystems
Hello, I realize this answer is too late to be of any use to the asker, but as part of a Matlab Answers cleanup effort, I will ...

4 years ago | 0

Answered
Bifurcation diagram in DC converter
Hello Don, I realize this comment is too late to be of use to you and I apologize for that. As part of an effort to clean up M...

4 years ago | 0

Answered
Battery Model
Hello Vincenzo, I realize this answer is far too late to be of use for you, but this is part of a matlab answers clean up proce...

4 years ago | 0

Answered
Model simulink block connection with different simscape
Hello Rawaa, you can combine the two technologies as Pemendra says, there are four blocks with names like this "Voltage-Current...

4 years ago | 0

| accepted

Answered
Undefined function 'etapar' for input arguments of type 'cell'.
Hello Arslan, it looks like something about your installation got corrupted or permissions were changed on your computer. I wo...

4 years ago | 0

Answered
Why do I get different results with asynchronous machine in Matlab/Simscape?
Hello Ata, unfortunately, your question is in regards to your personal implementation of some equations in Matlab and not a que...

4 years ago | 0

Answered
PMSM (Single-Phase) rotor position at standstill due to asymmetric airgap parameter
Hello Federico, Zero reference is the blue line. The initial position of the rotor is given on the variable tab. If we initiali...

4 years ago | 1

| accepted

Answered
Incorrect initialization of synchronous machine when simulating with saturation in "continuous" simulation mode
I believe this was a bug that has been addressed, if anyone experiences is again (when using an up to date version of matlab) pl...

4 years ago | 0

Answered
Problem with Predictive Voltage Control four leg two level inverter
Hello Trio, unfortunately, this questions seems more to do with the implementation of a specific type of control algorithm than...

4 years ago | 0

Answered
Simulink Fuel Cell Stack - Hydrogen & Oxygen Utilization
Hello Matthew, this is a case where the model behaves differently depending on certain choices made in the mask of the componen...

4 years ago | 0

Answered
H bridge inverter output current increase not as expected
Hello Timothy, this actually looks mostly like an initial condition issue. Specialized Power Systems actually has an algorithm...

4 years ago | 0

Answered
PMSM (simscape) No load test
If you are using specialized power systems, it can be very hard to model a no-load test without very small time steps. It might...

4 years ago | 0

Answered
technical issue while installing simscape add on
Cleaning up the Answers section. This question was answered in the comment section and moving it here: Manish Mahalwal on 19 ...

4 years ago | 0