Answered
How the voltage based active cell balancing model works for larger voltage difference and not working for smaller voltage difference ?
You are modelling lithium ion batteries and giving them different nominal voltages. These batteries are not linear and would no...
How the voltage based active cell balancing model works for larger voltage difference and not working for smaller voltage difference ?
You are modelling lithium ion batteries and giving them different nominal voltages. These batteries are not linear and would no...
2 years ago | 0
Answered
unable to resolve cooling plate error
I think you need to set your number of nodes to 14 and not 14x14 for the cooling plate. If that doesn't solve it, please share ...
unable to resolve cooling plate error
I think you need to set your number of nodes to 14 and not 14x14 for the cooling plate. If that doesn't solve it, please share ...
2 years ago | 0
| accepted
Answered
How to import .SUBCKT Spice model into MATLAB Simscape?
Unfortunately, there is no guarentee that an imported pspice model will work in simscape. It sounds like you used the command c...
How to import .SUBCKT Spice model into MATLAB Simscape?
Unfortunately, there is no guarentee that an imported pspice model will work in simscape. It sounds like you used the command c...
2 years ago | 0
Answered
How can I gate-off the Average-Value VSC block ?
This will be easier to do with a slightly different block, the Converter (Three Phase). You can set this block to averaged swit...
How can I gate-off the Average-Value VSC block ?
This will be easier to do with a slightly different block, the Converter (Three Phase). You can set this block to averaged swit...
2 years ago | 0
Answered
Help me finish the scheme in MATLAB
This issue is that because an ideal transformer is used, it is perfectly isolated from the rest of the circuit. Unfortunately, ...
Help me finish the scheme in MATLAB
This issue is that because an ideal transformer is used, it is perfectly isolated from the rest of the circuit. Unfortunately, ...
2 years ago | 1
| accepted
Answered
Rate Transition Data Control
Simulink signals don't support an 'empty' value. They will simply stay at whatever value they were at previously. This is the ...
Rate Transition Data Control
Simulink signals don't support an 'empty' value. They will simply stay at whatever value they were at previously. This is the ...
2 years ago | 0
Answered
Modeling the Discharge Dynamics of Table-Based Batteries
The battery has the option for turning on dynamics and choosing your resistances and time constants (similar to RC parameters). ...
Modeling the Discharge Dynamics of Table-Based Batteries
The battery has the option for turning on dynamics and choosing your resistances and time constants (similar to RC parameters). ...
2 years ago | 0
Answered
How to operate Front-End Inverter to control variable PMSG output
This is not exactly what you are looking for, but it is a good starting point. This is for a grid connected inverter: https://w...
How to operate Front-End Inverter to control variable PMSG output
This is not exactly what you are looking for, but it is a good starting point. This is for a grid connected inverter: https://w...
2 years ago | 0
| accepted
Answered
QZSI SVPWM ZSVM6 method help
I can't tell you exactly what is going on any more than the code can. This shared file is made by an individual user and you ca...
QZSI SVPWM ZSVM6 method help
I can't tell you exactly what is going on any more than the code can. This shared file is made by an individual user and you ca...
2 years ago | 0
Answered
Why is my BLDC model not working?
Your overall structure looks good in the picture, please provide more specific questions if you want additional help. I recomme...
Why is my BLDC model not working?
Your overall structure looks good in the picture, please provide more specific questions if you want additional help. I recomme...
2 years ago | 0
Answered
How to generate SVPWM using HDL code
You have to design your own module if you want it to be hdl compatible. There is no block that does this and generates hdl code...
How to generate SVPWM using HDL code
You have to design your own module if you want it to be hdl compatible. There is no block that does this and generates hdl code...
2 years ago | 0
Answered
Why is there DC offset present and how can this be removed?
The issue is that the initial conditions are unbalanced and as it's an open circuit with very little current flowing, it'll take...
Why is there DC offset present and how can this be removed?
The issue is that the initial conditions are unbalanced and as it's an open circuit with very little current flowing, it'll take...
2 years ago | 0
Answered
Dead time compensation inverter
please start here: https://www.mathworks.com/matlabcentral/answers/435838-add-dead-time-in-simulink
Dead time compensation inverter
please start here: https://www.mathworks.com/matlabcentral/answers/435838-add-dead-time-in-simulink
2 years ago | 0
Answered
load CAPMuniverse load Error
This is most likely caused by you not having the correct toolboxes installed to do this example. Do you have the financial tool...
load CAPMuniverse load Error
This is most likely caused by you not having the correct toolboxes installed to do this example. Do you have the financial tool...
2 years ago | 0
| accepted
Answered
How can I mechanically couple (line green) two electrical machines in Simscape Electrical?
You attatch their shaft port R directly to each other.
How can I mechanically couple (line green) two electrical machines in Simscape Electrical?
You attatch their shaft port R directly to each other.
2 years ago | 1
| accepted
Answered
How to connect controlled sources to Universal Bridge
In your case, you are trying to apply a controlled current source and a controlled voltage source. This is physically and mathm...
How to connect controlled sources to Universal Bridge
In your case, you are trying to apply a controlled current source and a controlled voltage source. This is physically and mathm...
2 years ago | 0
Answered
In STATCOM (Phasor Model) given in the documentation, why there are two power sources at both ends of the transmission line?
This is a very common way to model a specific part of a power system. Instead of needing to model in detail both sides of the p...
In STATCOM (Phasor Model) given in the documentation, why there are two power sources at both ends of the transmission line?
This is a very common way to model a specific part of a power system. Instead of needing to model in detail both sides of the p...
2 years ago | 0
Answered
Hello, I am performing block rotor test on Induction motor to find rotor resistance, for that I am setting motor inertia to infinite, but instead of giving zero speed it is giving rated speed, I am attaching file for the same.
It doesn't look like you actually set the inertia to infinite, but the better way to do this would be to change the motor mechan...
Hello, I am performing block rotor test on Induction motor to find rotor resistance, for that I am setting motor inertia to infinite, but instead of giving zero speed it is giving rated speed, I am attaching file for the same.
It doesn't look like you actually set the inertia to infinite, but the better way to do this would be to change the motor mechan...
2 years ago | 0
Answered
Why the 48 pulse GTO-Based STATCOM doesn't work effectively on my model?
This is an effort to clean up Matlab Answers. Unfortunately, this response is likely to late to be of help to this question: F...
Why the 48 pulse GTO-Based STATCOM doesn't work effectively on my model?
This is an effort to clean up Matlab Answers. Unfortunately, this response is likely to late to be of help to this question: F...
2 years ago | 0
Answered
Can I use the diode block in SimElectronics to build a tunnel diode?
Unfortunately there was no way to accomplish this with the diode block. You would have needed to build a custom block from scra...
Can I use the diode block in SimElectronics to build a tunnel diode?
Unfortunately there was no way to accomplish this with the diode block. You would have needed to build a custom block from scra...
2 years ago | 0
Answered
I'm having issues with powerflow in Simpower systems
This is an effort to clean up Matlab answers. I apologize as this answer is too late to be useful to the asker: Unfortunately,...
I'm having issues with powerflow in Simpower systems
This is an effort to clean up Matlab answers. I apologize as this answer is too late to be useful to the asker: Unfortunately,...
2 years ago | 0
Answered
Constant Power Diode Rectifier Load
This is part of an effort to clean up Matlab answers. I apologize that this answer is too late to be useful to the asker: In g...
Constant Power Diode Rectifier Load
This is part of an effort to clean up Matlab answers. I apologize that this answer is too late to be useful to the asker: In g...
2 years ago | 0
Answered
MATLAB switching problem in designing an Active Power Filter
This is an attempt to clean up Matlab answers. I realize this answer is too late to be useful for the asker: For this type of ...
MATLAB switching problem in designing an Active Power Filter
This is an attempt to clean up Matlab answers. I realize this answer is too late to be useful for the asker: For this type of ...
2 years ago | 0
Answered
Verify the presence second harmonic component on the boost input side of a DC-DC boost converter connected to a DC-AC single phase inverter in simulink
This is an answer in an attempt to clean up Matlab answers. I apologize that this answer is likely too late to be of use to the...
Verify the presence second harmonic component on the boost input side of a DC-DC boost converter connected to a DC-AC single phase inverter in simulink
This is an answer in an attempt to clean up Matlab answers. I apologize that this answer is likely too late to be of use to the...
2 years ago | 0
Answered
How do I control or limit the speed of single phase motor fed by Z-source inverter to a desired value?
This is part of an effort to clean up Matlab Answers, I apologize that this answer is too late to likely be of use to the origin...
How do I control or limit the speed of single phase motor fed by Z-source inverter to a desired value?
This is part of an effort to clean up Matlab Answers, I apologize that this answer is too late to likely be of use to the origin...
2 years ago | 0
Answered
Dq referance frame control for single phase inverter
It looks like you aren't calculating your d/q correctly and it looks like it might not be routed to the correct location. You c...
Dq referance frame control for single phase inverter
It looks like you aren't calculating your d/q correctly and it looks like it might not be routed to the correct location. You c...
2 years ago | 0
Answered
How do I model Electrical braking roller using Simulink or Simscape
This answer is being provided late as part of an effort to clean up Matlab Answers: You will need to model a few things. you ...
How do I model Electrical braking roller using Simulink or Simscape
This answer is being provided late as part of an effort to clean up Matlab Answers: You will need to model a few things. you ...
2 years ago | 0
Submitted
Dual Active Bridge Modulation Demo
Basic Controls and Modulation Techniques for Dual Active Bridges
2 years ago | 92 downloads |
Answered
DEVELOPMENT OF A DUAL MODE FREQUENCY CONTROLLER FOR STANDALONE, MICRO AND MINI HYDRO POWER SYSTEMS
I realize this answer is likely too late to be of any use to you, but as your question is a good one and getting a number of vie...
DEVELOPMENT OF A DUAL MODE FREQUENCY CONTROLLER FOR STANDALONE, MICRO AND MINI HYDRO POWER SYSTEMS
I realize this answer is likely too late to be of any use to you, but as your question is a good one and getting a number of vie...
2 years ago | 0
Answered
Rust Support for generated Matlab Models
MathWorks has made no public comment on their future plans for Rust.
Rust Support for generated Matlab Models
MathWorks has made no public comment on their future plans for Rust.
2 years ago | 2
| accepted