Answered
a problem about matlab link to pro/e with "smlink"
Please follow the instructions in the documentation of SimMechanics Link, especially <http://www.mathworks.com/help/toolbox/phys...

14 years ago | 0

| accepted

Answered
Does MW own copyright on C code generated by Matlab?
I suggest you have a read of |C:/Program Files/MATLAB/R2011a/license.txt| or the corresponding file for your installation (acces...

14 years ago | 2

Answered
Can't simulate simple lever in SimMechanics
You just need two bodies, one for AOB and another one for the second body starting at B. You just need to define the appropriate...

14 years ago | 1

| accepted

Answered
Excllink with open office?
I think it only works with Excel, see: <http://www.mathworks.com/help/releases/R2011a/toolbox/exlink/f2-2282.html> HTH, ...

14 years ago | 0

| accepted

Answered
workspace variable path
Nowhere, they just reside in memory until you save them with the <http://www.mathworks.com/help/releases/R2011a/techdoc/ref/save...

14 years ago | 0

| accepted

Answered
Interpolation
You probably need to use <http://www.mathworks.com/help/releases/R2011a/techdoc/ref/interp1.html |interp1|>. If you can post you...

14 years ago | 0

| accepted

Answered
I want the simulation model of the electrostatic generator
There are various <http://www.mathworks.com/help/releases/R2011a/toolbox/physmod/powersys/ref/f2-16412.html#f2-10795 electrical ...

14 years ago | 0

Answered
Can we use pulse generator as input to Embedded Matlab Function
Yes, as far as I know, it's just a standard Simulink input. Just make sure the chart is updated with a fast enough sample time t...

14 years ago | 1

| accepted

Answered
FFT of discrete time domain data
I would suggest following the example in the <http://www.mathworks.com/help/releases/R2011a/techdoc/ref/fft.html |fft|> document...

14 years ago | 0

| accepted

Answered
Step Response
First, a comment: it would help if your question was properly formatted. As it is, it's very difficult to read. If I understa...

14 years ago | 1

Answered
showing correlation on scatter
Use the <http://www.mathworks.com/help/releases/R2011a/techdoc/ref/text.html |text|> function: text(x_text, y_text, ['R^2 =...

14 years ago | 3

| accepted

Answered
Calculating Norm(inf) within Stateflow
Thanks for the additional comments. Yes, I was using only Simulink and can reproduce the problem in Stateflow. I worked around i...

14 years ago | 0

| accepted

Answered
Exact linearization of systems with transport delay (R2007a)
The ability to generated linearizes model with exact time-delay representations was added in R2007b, see the <http://www.mathwor...

14 years ago | 0

| accepted

Answered
datestr format in lower case
Can you use the <http://www.mathworks.com/help/releases/R2011a/techdoc/ref/lower.html |lower|> function to convert the string to...

14 years ago | 0

| accepted

Answered
interp2 in Embedded MATLAB Function
Yes, the data type returned by the function is |mxArray|. See <http://www.mathworks.co.uk/matlabcentral/answers/5207-it-will-occ...

14 years ago | 0

Answered
Calculating Norm(inf) within Stateflow
I have tried it with a <http://www.mathworks.com/help/releases/R2011a/toolbox/simulink/slref/matlabfunction.html MATLAB Function...

14 years ago | 0

Answered
Control systems using MATLAB/SIMULINK
It sounds like your integrators are saturating. You need to figure out what's causing them to saturate and fix the root cause. U...

14 years ago | 0

| accepted

Answered
ideal mass spring dampening system with an impulse
You can convert your ODE to an LTI system and use the <http://www.mathworks.com/help/releases/R2011a/toolbox/control/ref/impulse...

14 years ago | 0

Answered
Simulating a fan motor
Have a look at this <http://www.mathworks.co.uk/products/demos/simscape/model_projector/index.html short video>. Although it foc...

14 years ago | 0

| accepted

Answered
How to fix "? ? ?" display error in Simulink Model
The number of delays must be positive, you can't have a number of de lays equal to -1. Change it to a positive number. If I misu...

14 years ago | 0

Answered
DC machine as Ellectric Motor
Have a look at |power_HEV_powertrain.mdl| for a good starting point. If there's not enough current, then you probably need a big...

14 years ago | 0

Answered
pwm signal generation
Use the <http://www.mathworks.com/access/helpdesk/help/toolbox/simulink/slref/saturation.html Saturation> block. HTH, Arna...

14 years ago | 1

Answered
How to create a custom damper component on Simscape
I assume you have something like this: <https://picasaweb.google.com/lh/photo/-wyO717K8a1EwQIJJ8Khaw?feat=directlink> <<https:...

14 years ago | 1

| accepted

Answered
What type of Joint is a Straight Slot ?
If I understand correctly, you want to model a joint with some clearance, is that right? The trick is to measure the position an...

14 years ago | 0

Answered
Inconsistent results using SimDriveline's variable gear ratio
It's difficult to provide a definite answer without seeing the model first. I would, however, suggest that (if you can) you try ...

14 years ago | 0

Answered
problem with joint auctator input signal in simmechanics
I assume you are using motion actuation. If that's the case, you want to make sure that the position, velocity and acceleration ...

14 years ago | 0

Answered
pneumatic valve
Have a look at the demo |ssc_pneumatic_actuator.mdl| that is part of Simscape. It includes a model of a 5-way directional valve....

14 years ago | 1

| accepted

Answered
Vehicle Networking Toolbox setup
Which drivers are you using? What operating system? Some suggestions: # Make sure that you are using the latest drivers from ...

14 years ago | 2

| accepted

Answered
Figure reuse and PUBLISH
If the question relates to publishing, you might want to use <http://www.mathworks.com/help/techdoc/ref/snapnow.html |snapnow|>....

14 years ago | 0

| accepted

Answered
Frequency response!!
If you have two time series, you probably need to use <http://www.mathworks.com/help/releases/R2011a/techdoc/ref/fft.html |fft|>...

14 years ago | 0