Error in Code build for C2000 Piccolo F28027

4 views (last 30 days)
Part Number: TMS320F28027
I have F28027 Piccolo board. I have installed Embedded Coder Support Package, Control Suite, and CCSv6. Also in Matlab 2017b, simulink model configuration in hardware implementation section I have selected board. But when I build model (Ctrl+B) I get the following error:
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Build
5 102:11 PM Elapsed: 11 sec
### Starting build procedure for model: Blink ### Generating code and artifacts to 'Model specific' folder structure
Code Generation
3
Elapsed: 9 sec
### Generating code into build folder: C:\Users\Sanjeev Gupta\Documents\MATLAB\project\Blink_ert_rtw ### Invoking Target Language Compiler on Blink.rtw ### Using System Target File: C:\Program Files\MATLAB\R2017b\rtw\c\ert\ert.tlc ### Loading TLC function libraries ### Initial pass through model to cache user defined code . ### Caching model source code ### Writing header file Blink_types.h ### Writing header file Blink.h ### Writing header file rtwtypes.h ### Writing source file Blink.c . ### Writing header file Blink_private.h ### Writing source file Blink_data.c ### Writing header file rtmodel.h ### Writing source file ert_main.c ### TLC code generation complete. ### Evaluating PostCodeGenCommand specified in the model
Code Composer Studio Project
1
Elapsed: 0.509 sec
### Creating CCS Project at : C:\Users\Sanjeev Gupta\Documents\MATLAB\project\Blink_ert_rtw\CCS_Project ### CCS project created successfully Open project in Code Composer Studio.
### Using toolchain: Texas Instruments C2000 Code Generation Tools v16.9.2 | gmake (64-bit Windows) ### Creating 'C:\Users\Sanjeev Gupta\Documents\MATLAB\project\Blink_ert_rtw\Blink.mk' ... ### Building 'Blink': "C:\PROGRA~1\MATLAB\R2017b\bin\win64\gmake" -B -f Blink.mk all C:\Users\Sanjeev Gupta\Documents\MATLAB\project\Blink_ert_rtw>cd . C:\Users\Sanjeev Gupta\Documents\MATLAB\project\Blink_ert_rtw>if "" == "" ("C:\PROGRA~1\MATLAB\R2017b\bin\win64\gmake" -B -f Blink.mk all ) else ("C:\PROGRA~1\MATLAB\R2017b\bin\win64\gmake" -B -f Blink.mk ) C:/PROGRA~3/MATLAB/SupportPackages/R2017b/3P.instrset/tic2000codegentools.instrset/ti-cgt-c2000_16.9.2.LTS/bin/cl2000 --compile_only --large_memory_model --silicon_version=28 --define="LARGE_MODEL" -i"/~SupportFiles/DSP280x_headers" -i"/~SupportFiles/DSP280x_headers/include" -i"C:/PROGRA~3/MATLAB/SupportPackages/R2017b/3P.instrset/tic2000codegentools.instrset/ti-cgt-c2000_16.9.2.LTS/include" -v28 -ml -DMODEL=Blink -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DTERMFCN=1 -DONESTEPFCN=1 -DMAT_FILE=0 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DTID01EQ=0 -DDAEMON_MODE=1 -DMW_PIL_SCIFIFOLEN=4 -DSTACK_SIZE=512 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DRT -DTERMFCN=1 -DONESTEPFCN=1 -DMAT_FILE=0 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DTID01EQ=0 -DDAEMON_MODE=1 -DMW_PIL_SCIFIFOLEN=4 -DSTACK_SIZE=512 -DRT -DMODEL=Blink -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -IC:/Users/Sanjeev Gupta/DOCUME~1/MATLAB/project -IC:/Users/Sanjeev Gupta/DOCUME~1/MATLAB/project/Blink_ert_rtw -IC:/PROGRA~1/MATLAB/R2017b/extern/include -IC:/PROGRA~1/MATLAB/R2017b/simulink/include -IC:/PROGRA~1/MATLAB/R2017b/rtw/c/src -IC:/PROGRA~1/MATLAB/R2017b/rtw/c/src/ext_mode/common -IC:/PROGRA~1/MATLAB/R2017b/rtw/c/ert -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/tic2000/src -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/tic2000/inc -IC:/ti/controlSUITE/device_support/f2802x/v230/f2802x_common/include -IC:/ti/controlSUITE/device_support/f2802x/v230/f2802x_headers/include -IC:/ti/controlSUITE/device_support/f2802x/v230 -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/shared/externalmode_daemon/include --output_file=MW_c28xx_board.obj MW_c28xx_board.c [project.] >> WARNING: more than one source file is specified; option --output_file is ignored Fatal error: cannot open source file "Gupta/DOCUME~1/MATLAB/project" 1 catastrophic error detected in the compilation of "Gupta/DOCUME~1/MATLAB/project". Compilation terminated. >> Compilation failure gmake: *** [MW_c28xx_board.obj] Error 1 C:\Users\Sanjeev Gupta\Documents\MATLAB\project\Blink_ert_rtw>echo The make command returned an error of 2 The make command returned an error of 2 C:\Users\Sanjeev Gupta\Documents\MATLAB\project\Blink_ert_rtw>An_error_occurred_during_the_call_to_make 'An_error_occurred_during_the_call_to_make' is not recognized as an internal or external command, operable program or batch file. ### Creating HTML report file Blink_codegen_rpt.html
### Build procedure for model: 'Blink' aborted due to an error.
Error(s) encountered while building "Blink": ### Failed to generate all binary outputs.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Also can you provide all the nessesary steps that include :
  • [CheckEnvSetupCheckEnvSetup] how to set directory (and whether to add user variable or system variable) from System Advanced Settings -> Environment Variables->
  • what are the specific settings required in xmakefilesetup
  • and how do I check connectivity of matlab and controller (F28027)
I tried the program of using a pulse generator and digital output for blinking on board LED.
I have Matlab2017b, CCSv6, C2000 ware
Any help is appreciated......
Thank you

Accepted Answer

Venkatesh Chilapur
Venkatesh Chilapur on 13 Jan 2020
Hi,
There must a space in 'Sanjeev Gupta' which is part of codegen folder.
Ensure you have no space in the path.
Regards,
Venkatesh C

More Answers (2)

Walter Roberson
Walter Roberson on 13 Jan 2020
You need to move the files into a path in which there is no space in any of the directory names. The space in your username is confusing the software.

Yusuf Selim KARATAS
Yusuf Selim KARATAS on 13 Jan 2020
I dont know the source of the problem. But I have learned that sometimes you need to change clock frequency on these boards. Keep that in your mind.

Products

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!