Get Started with Wireless Testbench
Wireless Testbench™ enables you to test wideband wireless systems using MATLAB® with a software-defined radio (SDR). You can use your SDR to perform spectrum monitoring with high-speed data capture.
The product provides capabilities such as intelligent signal capture and hardware-based resampling that leverage the FPGA hardware on the SDR. You can specify waveform-specific characteristics to trigger signal capture and analyze the data of interest. You can also transmit and capture custom signals at arbitrary sample rates or standards-based signals (5G and WLAN) at their native sample rates.
- Capture from Frequency Band
Capture IQ data using single radio antenna and plot the frequency spectrum of the captured data.
- Triggered Capture Using Preamble Detection
Capture data from the air upon detecting a preamble sequence.
- Triggered Capture Using Energy Detection
Capture data from the air upon detecting signal energy.
- Transmit Waveform
Transmit generated waveform using single radio antenna.
- Loopback Transmit and Capture
Transmit and capture generated waveform using single radio.