Troubleshooting PX4 Firmware Build Failure While Using createCustomPX4Parameter Function
Description
When you manually change the CMake file and then use the
createCustomPX4Parameter function to build PX4 firmware
through the Add Parameter Information dialog box, the PX4
firmware build might stop and display errors.
Action
To resolve this issue, perform the hardware setup process again and ensure that
you select the correct CMake file in the Select a PX4 Autopilot and Build
Target hardware setup screen. Then, use the
createCustomPX4Parameter function.
See Also
Troubleshooting Firmware Build Failures | Troubleshooting Unresponsive Firmware Upload | Troubleshooting PX4 Firmware Build Failure Due to Flash Memory Overflow on the Hardware
