Main Content

AXI Manager

Access AXI subordinate memory on FPGA board from MATLAB® or Simulink®

Note

MATLAB AXI master has been renamed to AXI manager. In the software and documentation, the terms "manager" and "subordinate" replace "master" and "slave," respectively.

Access on-board memory locations from MATLAB or Simulink by using the AXI manager IP in your FPGA design. This IP connects to subordinate memory locations on the board. The IP also responds to read and write commands from MATLAB or Simulink, over JTAG, PCI Express®, or Ethernet cable.

Functions

setupAXIManagerForVivado Add AXI manager IP path to Vivado project
readmemoryRead data out of AXI4 memory-mapped subordinates
writememoryWrite data to AXI4 memory-mapped subordinates
releaseRelease JTAG or Ethernet cable resource
copyImageToHostSDCardPathCopy board-specific SD card image files to host SD card location
loadImageToTargetSDCardPathLoad board-specific SD card image files to target SoC device SD card location
loadBitstreamLoad custom FPGA bitstream and its corresponding DTB file to target SoC device

Objects

aximanagerRead and write memory locations on FPGA board from MATLAB

Blocks

AXI Manager ReadRead memory locations on FPGA board from Simulink
AXI Manager WriteWrite memory locations on FPGA board from Simulink

Topics