Convert rotating reference frame vectors to two-phase stationary reference frame
Embedded Coder® Support Package for Texas Instruments™ C2000™ Processors/ Optimization/ C28x DMC
Embedded Coder Support Package for Texas Instruments C2000 F28M3x Concerto™ Processors Processors/ Optimization/ C28x DMC
and is illustrated in the following figure.
The inputs to this block are the direct axis (
Ds) and quadrature axis
Qs) components of the transformed signal in the rotating frame and the
phase angle (
Angle) between the stationary and rotating frames.
The outputs are the direct axis (
Alpha) and the quadrature axis
Beta) components of the transformed signal.
The variables used in the preceding figure and equations correspond to the block variables as shown in the following table:
|Equation Variables||Block Variables|
To generate optimized code from this block, enable the
TI C28x (ISO) Code Replacement
The implementation of this block does not call the corresponding Texas Instruments library function during code generation. The TI function uses a global Q setting and the MathWorks® code used by this block dynamically adjusts the Q format based on the block input. See Using the IQmath Library for more information.
For detailed information on the DMC library, see C/F 28xx Digital Motor Control Library, Literature Number SPRC080, available at the Texas Instruments Web site.