Stop or Restart a Model Running on Raspberry Pi Hardware

Caution

Do not use the RESET button to stop a running model and reboot the board. Doing so can corrupt operating system and program files. To repair corrupt files, replace the firmware using Hardware Setup.

To stop a model running on the board, in the MATLAB® Command Window, enter:

h=raspberrypi;
h.stopModel('modelName');
For example, to stop the sumdiff model, enter:
mypi=raspberrypi;
mypi.stopModel('sumdiff');

To restart a model that was previously running on the board or run multiple instances of a model, in the MATLAB Command Window, enter:

h=raspberrypi; 
h.runModel('modelName');

Note

You do not need to enter h=raspberrypi; multiple times if a previous instance of h is available in the MATLAB Workspace.

For example, to restart the sumdiff model you stopped in the previous example, enter:

h.runModel('sumdiff');