You can use the Quick-Control Oscilloscope, which is included in the Instrument Control Toolbox™ Support Package for National Instruments™ VISA and ICP Interfaces, for any oscilloscope that uses an underlying IVI-C driver. However, you do not have to directly deal with the underlying driver. You can also use it for Tektronix® oscilloscopes. Quick Control Oscilloscope is an easy to use interface for getting up and running quickly using IVI-C oscilloscopes.
The documentation examples use a specific instrument, a Keysight™ MSO6104 oscilloscope. This feature works with any IVI-C class oscilloscope. You can follow the basic steps, using your particular instrument.
To use the Quick-Control Oscilloscope for an IVI-C scope, you must have the following software installed. Most components are installed by the Instrument Control Toolbox Support Package for National Instruments VISA and ICP Interfaces.
Windows® 64-bit platforms
VISA shared components (installed by the support package)
VISA (installed by the support package)
National Instruments IVI® compliance package NICP 4.1 or later (installed by the support package)
Your instrument’s device-specific driver
You can use
instrhwinfo to confirm that the
required software is installed.
% Check that the software is properly installed. instrhwinfo('ivi')