The set of Simulink® blocks and core functionality available for Simulink Coder™ Support Package for BeagleBone® Blue Hardware.
|I2C Master Read||Read data from I2C slave device or I2C slave device register|
|I2C Master Write||Write data to I2C slave device or I2C slave device register|
|SPI Master Transfer||Write data to and read data from SPI slave device|
|SPI Register Read||Read data from SPI slave device register|
|SPI Register Write||Write data to registers of an SPI slave device|
|SCI Write||Send serial data to UART port (Since R2019a)|
|SCI Read||Read serial data from UART port (Since R2019a)|
|TCP/IP Receive||Receive data over TCP/IP network from remote host|
|TCP/IP Send||Send data over TCP/IP network to another remote host|
|UDP Receive||Receive UDP packets from another UDP host on an Internet network|
|UDP Send||Send UDP packets to another UDP host on Internet network|
|Encoder||Measure incremental position and direction of a rotating motor|
|Barometer||Measure barometric air pressure around the BMP280 sensor (Since R2019a)|
|MPU9250||Measure acceleration, angular rate, and magnetic field, and calculate fusion values such as Euler angles and quaternion along the axes of MPU-9250 sensor (Since R2019a)|
- Model Configuration Parameters for BeagleBone Blue Hardware
Parameter and configuration options for creating and running applications on the hardware.
- Open Block Library for BeagleBone Blue Hardware
Locate block library for the hardware.
- Getting Started with Simulink Coder Support Package for BeagleBone Blue Hardware
This example shows you how to use Simulink® Coder™ Support Package for BeagleBone® Blue Hardware to run a Simulink model on a BeagleBone Blue hardware.