Stream FIFO

R2026b

Control backpressure between hardware logic and upstream data interface

• 

Stream FIFO block

To add a block to a model, double-click the canvas and start typing the block name. Then, select the block from the list.

Libraries:
SoC Blockset for AMD / SoC System Simulation / Hardware Logic Connectivity
HDL Coder / SoC System Simulation / Hardware Logic Connectivity

Description

The Stream FIFO block controls the backpressure from the hardware logic to the upstream data interface. It also controls the flow between the upstream and downstream data interfaces of the hardware logic. Integrate this block as a configurable first-in, first-out (FIFO) block for AXI4 data stream applications. The block enables you to configure its depth and set its almost full threshold value.

Ports

Input

dataIn — Input stream data

scalar

Input stream data from the data source. Specify this value as a scalar.

Data Types: single | double | int8 | int16 | int32 | int64 | uint8 | uint16 | uint32 | uint64 | fixed point

dValidIn — Indication of valid input stream data

Boolean scalar

Control signal that indicates if the input stream data from the data source is valid. When this value is 1 (true), the block accepts the values on the dataIn port. When this value is 0 (false), the block ignores the values on the dataIn port.

Data Types: Boolean

rdyFromDown — Ready signal from downstream interface

Boolean scalar

Control signal that indicates if the block can send stream data to the downstream interface. When this value is 1 (true), the downstream interface is ready, and the block can send the stream data. When this value is 0 (false), the downstream interface is not ready, and the block cannot send the stream data.

Data Types: Boolean

Output

dataOut — Output stream data

scalar

Output stream data to the downstream interface. The data type of this output data is the same as the data type of the input data.

Data Types: single | double | int8 | int16 | int32 | int64 | uint8 | uint16 | uint32 | uint64 | fixed point

dValidOut — Indication of valid output stream data

Boolean scalar

Control signal that indicates if the output stream data is valid. When this value is 1 (true), the output stream data on the dataOut port is valid. When this value is 0 (false), the output stream data on the dataOut port is not valid.

Data Types: Boolean

rdyToUp — Ready signal to upstream interface

Boolean scalar

Control signal that indicates if the block is ready to receive stream data from the upstream interface. When this value is 1 (true), the block is ready to accept stream data from the upstream interface. When this value is 0 (false), the block is not ready to accept stream data from the upstream interface.

Data Types: Boolean

Parameters

Depth of FIFO — FIFO depth

16 (default) | integer greater than or equal to four

Specify the depth of the FIFO as an integer greater than or equal to four. This value is the maximum number of entries that can be buffered before data gets dropped.

Almost full threshold — Almost full threshold value

8 (default) | positive integer

Specify a value that asserts a back-pressure signal from the block to the data source.

To avoid dropping data, set a value allowing the data source enough time to react to backpressure. This value must be a positive integer and smaller than the FIFO depth.

Programmatic Use: Add Block

To add the block programmatically, use the add_block function with one of these library block paths as the source.

"hwlogicconnlib/Stream FIFO"

"hwlogicconnlib/Stream FIFO"

Example: add_block("hwlogicconnlib/Stream FIFO","myModel/myBlock",MakeNameUnique="on")

Extended Capabilities

HDL Code Generation

Generate VHDL, Verilog and SystemVerilog code for FPGA and ASIC designs using HDL Coder™.

To automatically generate HDL code for your design, and execute on an SoC device, use the SoC Builder tool. See Use SoC Builder to Generate SoC Design.

Using SoC Blockset™ for AMD, you can model a simplified streaming protocol in your model. Use HDL Coder™ to generate AXI4-Stream interfaces in the IP core. For more information about the AXI4-stream protocol, see AXI4-Stream Interface.

Fixed-Point Conversion
Design and simulate fixed-point systems using Fixed-Point Designer™.

Version History

Introduced in R2019a