Transfer Fcn Real Zero
Implement discrete-time transfer function that has real zero and no pole
Libraries:
Simulink /
Discrete
Description
The Transfer Fcn Real Zero block implements a discrete-time transfer function that has a real zero and effectively no pole.
Ports
Input
Port_1 — Input signal
scalar | vector
Input signal to the discrete-time transfer function algorithm.
Data Types: single
| double
| int8
| int16
| int32
| int64
| uint8
| uint16
| uint32
| uint64
| fixed point
Output
Port_1 — Output signal
scalar | vector
Output signal that is the discrete-time transfer function with a real zero and effectively no pole of the input signal.
Data Types: single
| double
| int8
| int16
| int32
| int64
| uint8
| uint16
| uint32
| uint64
| fixed point
Parameters
Zero (in Z plane) — Zero
0.75
(default) | scalar
Specify the zero in the Z plane.
Programmatic Use
Block Parameter:
ZeroZ |
Type: character vector |
Value: real scalar |
Default:
'0.75' |
Initial condition for previous input — Initial condition for previous input
0.0
(default) | scalar
Specify the initial condition for the previous input.
Programmatic Use
Block Parameter:
ICPrevInput |
Type: character vector |
Value: real scalar |
Default:
'0.0' |
Input processing — Specify sample- or frame-based processing
Elements as channels (sample based)
(default) | Columns as channels (frame based)
Specify whether the block performs sample- or frame-based processing:
Columns as channels (frame based)
— Treat each column of the input as a separate channel (frame-based processing).Note
Frame-based processing requires a DSP System Toolbox™ license.
For more information, see Sample- and Frame-Based Concepts (DSP System Toolbox).
Elements as channels (sample based)
— Treat each element of the input as a separate channel (sample-based processing).
Use Input processing to specify whether the block performs sample- or frame-based processing. For more information about these two processing modes, see Sample- and Frame-Based Concepts (DSP System Toolbox).
Programmatic Use
Block Parameter:
InputProcessing |
Type: character vector |
Values: 'Columns as channels
(frame based)' | 'Elements as channels (sample
based)' |
Default: 'Elements as channels
(sample based)' |
Integer rounding mode — Rounding mode for fixed-point operations
Floor
(default) | Ceiling
| Convergent
| Nearest
| Round
| Simplest
| Zero
Specify the rounding mode for fixed-point operations. For more information, see Rounding Modes (Fixed-Point Designer).
Block parameters always round to the nearest representable value. To control the rounding of a block parameter, enter an expression using a MATLAB® rounding function into the mask field.
Programmatic Use
To set the block parameter value programmatically, use
the set_param
function.
Parameter: | RndMeth |
Values: | 'Floor' (default) | 'Ceiling' | 'Convergent' | 'Nearest' | 'Round' | 'Simplest' | 'Zero' |
Saturate to max or min when overflows occur — Method of overflow action
off
(default) | on
When you select this check box, overflows saturate to the maximum or minimum value that the data type can represent. Otherwise, overflows wrap.
When you select this check box, saturation applies to every internal operation on the block, not just the output or result. In general, the code generation process can detect when overflow is not possible. In this case, the code generator does not produce saturation code.
Programmatic Use
Block Parameter:
DoSatur |
Type: character vector |
Values:
'off' | 'on' |
Default:
'off' |
Block Characteristics
Extended Capabilities
C/C++ Code Generation
Generate C and C++ code using Simulink® Coder™.
PLC Code Generation
Generate Structured Text code using Simulink® PLC Coder™.
Fixed-Point Conversion
Design and simulate fixed-point systems using Fixed-Point Designer™.
Version History
Introduced before R2006a
See Also
MATLAB Command
You clicked a link that corresponds to this MATLAB command:
Run the command by entering it in the MATLAB Command Window. Web browsers do not support MATLAB commands.
Select a Web Site
Choose a web site to get translated content where available and see local events and offers. Based on your location, we recommend that you select: .
You can also select a web site from the following list:
How to Get Best Site Performance
Select the China site (in Chinese or English) for best site performance. Other MathWorks country sites are not optimized for visits from your location.
Americas
- América Latina (Español)
- Canada (English)
- United States (English)
Europe
- Belgium (English)
- Denmark (English)
- Deutschland (Deutsch)
- España (Español)
- Finland (English)
- France (Français)
- Ireland (English)
- Italia (Italiano)
- Luxembourg (English)
- Netherlands (English)
- Norway (English)
- Österreich (Deutsch)
- Portugal (English)
- Sweden (English)
- Switzerland
- United Kingdom (English)