# P-Channel LDMOS FET

P-Channel laterally diffused metal oxide semiconductor or vertically diffused metal oxide semiconductor transistors suitable for high voltage

**Library:**Simscape / Electrical / Semiconductors & Converters

## Description

The P-Channel LDMOS FET block lets you model LDMOS (or VDMOS) transistors suitable for high voltage. The model is based on surface potential and includes effects due to an extended drain (drift) region:

Nonlinear capacitive effects associated with the drift region

Surface scattering and velocity saturation in the drift region

Velocity saturation and channel-length modulation in the channel region

Charge conservation inside the model, so you can use the model for charge sensitive simulations

The intrinsic body diode

Reverse recovery in the body diode model

Temperature scaling of physical parameters

For the thermal variant (see Thermal Port), dynamic self-heating

For information on physical background and defining equations, see the N-Channel LDMOS FET block reference page. Both the p-type and n-type versions of the LDMOS model use the same underlying code with appropriate voltage transformations, to account for the different device types.

The charge model is similar to that of the surface-potential-based MOSFET model, with additional expressions to account for the charge in the drift region. The block uses the derived equations as described in [1], which include both inversion and accumulation in the drift region.

### Modeling Body Diode

The block models the body diode as an ideal, exponential diode with both junction and diffusion capacitances:

$${I}_{dio}={I}_{s}\left[\mathrm{exp}\left(-\frac{{V}_{BD}}{n{\varphi}_{T}}\right)-1\right]$$

$${C}_{j}=\frac{{C}_{j0}}{\sqrt{1+\frac{{V}_{BD}}{{V}_{bi}}}}$$

$${C}_{diff}=\frac{\tau {I}_{s}}{n{\varphi}_{T}}\mathrm{exp}\left(-\frac{{V}_{BD}}{n{\varphi}_{T}}\right)$$

where:

*I*is the current through the diode._{dio}*I*is the reverse saturation current._{s}*V*is the body-drain voltage._{BD}*n*is the ideality factor.*ϕ*is the thermal voltage._{T}*C*is the junction capacitance of the diode._{j}*C*is the zero-bias junction capacitance._{j0}*V*is the built-in voltage._{bi}*C*is the diffusion capacitance of the diode._{diff}*τ*is the transit time.

The capacitances are defined through an explicit calculation of charges, which are then differentiated to give the capacitive expressions above. The block computes the capacitive diode currents as time derivatives of the relevant charges, similar to the computation in the surface-potential-based MOSFET model.

### Modeling Temperature Dependence

The default behavior is that dependence on temperature is not modeled, and the
device is simulated at the temperature for which you provide block parameters. To
model the dependence on temperature during simulation, select ```
Model
temperature dependence
```

for the
**Parameterization** parameter on the **Temperature
Dependence** tab.

The model includes temperature effects on the capacitance characteristics, as well as modeling the dependence of the transistor static behavior on temperature during simulation.

The **Measurement temperature** parameter on the
**Main** tab specifies temperature
*T _{m1}* at which the other device
parameters have been extracted. The

**Temperature Dependence**tab provides the simulation temperature,

*T*, and the temperature-scaling coefficients for the other device parameters. For more information, see Temperature Dependence.

_{s}### Thermal Port

The block has an optional thermal port, hidden by default. To expose the thermal port,
right-click the block in your model, and then from the context menu select
**Simscape** > **Block choices** >
**Show thermal port**. This action displays the thermal port
**H** on the block icon, and exposes the **Thermal
Port** parameters.

Use the thermal port to simulate the effects of generated heat and device temperature. For
more information on using thermal ports and on the **Thermal Port**
parameters, see Simulating Thermal Effects in Semiconductors.

The thermal variant of the block includes dynamic self-heating, that is, lets you simulate the effect of self-heating on the electrical characteristics of the device.

## Ports

### Conserving

## Parameters

## Model Examples

## Compatibility Considerations

## References

[1] Aarts, A., N. D’Halleweyn, and R. Van Langevelde. “A
Surface-Potential-Based High-Voltage Compact LDMOS Transistor Model.”
*IEEE Transactions on Electron Devices*. 52(5):999 - 1007. June
2005.

[2] Van Langevelde, R., A. J. Scholten, and D. B .M. Klaassen.
"Physical Background of MOS Model 11. Level 1101."* Nat.Lab. Unclassified
Report 2003/00239*. April 2003.

[3] Oh, S-Y., D. E. Ward, and R. W. Dutton. “Transient
analysis of MOS transistors.” *IEEE J. Solid State
Circuits*. SC-15, pp. 636-643, 1980.

## Extended Capabilities

## See Also

**Introduced in R2016b**