This example shows how to use the `rng`

function, which provides control over random number generation.

(Pseudo)Random numbers in MATLAB come from the `rand`

, `randi`

, and `randn`

functions. Many other functions call those three, but those are the fundamental building blocks. All three depend on a single shared random number generator that you can control using `rng`

.

It's important to realize that "random" numbers in MATLAB are not unpredictable at all, but are generated by a deterministic algorithm. The algorithm is designed to be sufficiently complicated so that its output *appears* to be an independent random sequence to someone who does not know the algorithm, and can pass various statistical tests of randomness. The function that is introduced here provides ways to take advantage of the determinism to

repeat calculations that involve random numbers, and get the same results, or

guarantee that different random numbers are used in repeated calculations

and to take advantage of the apparent randomness to justify combining results from separate calculations.

If you look at the output from `rand`

, `randi`

, or `randn`

in a new MATLAB session, you'll notice that they return the same sequences of numbers each time you restart MATLAB. It's often useful to be able to reset the random number generator to that startup state, without actually restarting MATLAB. For example, you might want to repeat a calculation that involves random numbers, and get the same result.

`rng`

provides a very simple way to put the random number generator back to its default settings.

rng default rand % returns the same value as at startup

ans = 0.8147

What are the "default" random number settings that MATLAB starts up with, or that `rng default`

gives you? If you call `rng`

with no inputs, you can see that it is the Mersenne Twister generator algorithm, seeded with 0.

rng

`ans = `*struct with fields:*
Type: 'twister'
Seed: 0
State: [625x1 uint32]

You'll see in more detail below how to use the above output, including the `State`

field, to control and change how MATLAB generates random numbers. For now, it serves as a way to see what generator `rand`

, `randi`

, and `randn`

are currently using.

Each time you call `rand`

, `randi`

, or `randn`

, they draw a new value from their shared random number generator, and successive values can be treated as statistically independent. But as mentioned above, each time you restart MATLAB those functions are reset and return the same sequences of numbers. Obviously, calculations that use the *same* "random" numbers cannot be thought of as statistically independent. So when it's necessary to combine calculations done in two or more MATLAB sessions as if they *were* statistically independent, you cannot use the default generator settings.

One simple way to avoid repeating the same random numbers in a new MATLAB session is to choose a different seed for the random number generator. `rng`

gives you an easy way to do that, by creating a seed based on the current time.

```
rng shuffle
rand
```

ans = 0.1228

Each time you use `'shuffle'`

, it reseeds the generator with a different seed. You can call `rng`

with no inputs to see what seed it actually used.

rng

`ans = `*struct with fields:*
Type: 'twister'
Seed: 658002829
State: [625x1 uint32]

rng shuffle % creates a different seed each time rng

`ans = `*struct with fields:*
Type: 'twister'
Seed: 658002843
State: [625x1 uint32]

rand

ans = 0.0545

`'shuffle'`

is a very easy way to reseed the random number generator. You might think that it's a good idea, or even necessary, to use it to get "true" randomness in MATLAB. For most purposes, though, *it is not necessary to use** *`'shuffle'`

* at all*. Choosing a seed based on the current time does not improve the statistical properties of the values you'll get from `rand`

, `randi`

, and `randn`

, and does not make them "more random" in any real sense. While it is perfectly fine to reseed the generator each time you start up MATLAB, or before you run some kind of large calculation involving random numbers, it is actually not a good idea to reseed the generator too frequently within a session, because this can affect the statistical properties of your random numbers.

What `'shuffle'`

does provide is a way to avoid repeating the same sequences of values. Sometimes that is critical, sometimes it's just "nice", but often it is not important at all. Bear in mind that if you use `'shuffle'`

, you may want to save the seed that `rng`

created so that you can repeat your calculations later on. You'll see how to do that below.

So far, you've seen how to reset the random number generator to its default settings, and reseed it using a seed that is created using the current time. `rng`

also provides a way to reseed it using a specific seed.

You can use the same seed several times, to repeat the same calculations. For example, if you run this code twice ...

```
rng(1) % the seed is any non-negative integer < 2^32
x = randn(1,5)
```

`x = `*1×5*
-0.6490 1.1812 -0.7585 -1.1096 -0.8456

rng(1) x = randn(1,5)

`x = `*1×5*
-0.6490 1.1812 -0.7585 -1.1096 -0.8456

... you get exactly the same results. You might do this to recreate `x`

after having cleared it, so that you can repeat what happens in subsequent calculations that depend on `x`

, using those specific values.

On the other hand, you might want to choose *different* seeds to ensure that you don't repeat the same calculations. For example, if you run this code in one MATLAB session ...

```
rng(2)
x2 = sum(randn(50,1000),1); % 1000 trials of a random walk
```

and this code in another ...

rng(3) x3 = sum(randn(50,1000),1);

... you could combine the two results and be confident that they are not simply the same results repeated twice.

x = [x2 x3];

As with `'shuffle'`

there is a caveat when reseeding MATLAB's random number generator, because it affects all subsequent output from `rand`

, `randi`

, and `randn`

. Unless you need repeatability or uniqueness, it is usually advisable to simply generate random values without reseeding the generator. If you do need to reseed the generator, that is usually best done at the command line, or in a spot in your code that is not easily overlooked.

Not only can you reseed the random number generator as shown above, you can also choose the type of random number generator that you want to use. Different generator types produce different sequences of random numbers, and you might, for example, choose a specific type because of its statistical properties. Or you might need to recreate results from an older version of MATLAB that used a different default generator type.

One other common reason for choosing the generator type is that you are writing a validation test that generates "random" input data, and you need to guarantee that your test can always expect exactly the same predictable result. If you call `rng`

with a seed before creating the input data, it reseeds the random number generator. But if the generator type has been changed for some reason, then the output from `rand`

, `randi`

, and `randn`

will not be what you expect from that seed. Therefore, to be 100% certain of repeatability, you can also specify a generator type.

For example,

`rng(0,'twister')`

causes `rand`

, `randi`

, and `randn`

to use the Mersenne Twister generator algorithm, after seeding it with 0.

Using `'combRecursive'`

`rng(0,'combRecursive')`

selects the Combined Multiple Recursive generator algorithm, which supports some parallel features that the Mersenne Twister does not.

This command

`rng(0,'v4')`

selects the generator algorithm that was the default in MATLAB 4.0.

And of course, this command returns the random number generator to its default settings.

`rng default`

However, because the default random number generator settings may change between MATLAB releases, using `'default'`

does not guarantee predictable results over the long-term. `'default'`

is a convenient way to reset the random number generator, but for even more predictability, specify a generator type and a seed.

On the other hand, when you are working interactively and need repeatability, it is simpler, and usually sufficient, to call `rng`

with just a seed.

Calling `rng`

with no inputs returns a scalar structure with fields that contain two pieces of information described already: the generator type, and the integer with which the generator was last reseeded.

s = rng

`s = `*struct with fields:*
Type: 'twister'
Seed: 0
State: [625x1 uint32]

The third field, `State`

, contains a copy of the generator's current state vector. This state vector is the information that the generator maintains internally in order to generate the next value in its sequence of random numbers. Each time you call `rand`

, `randi`

, or `randn`

, the generator that they share updates its internal state. Thus, the state vector in the settings structure returned by `rng`

contains the information necessary to repeat the sequence, beginning from the point at which the state was captured.

While just being able to see this output is informative, `rng`

also accepts a settings structure as an *input*, so that you can save the settings, including the state vector, and restore them later to repeat calculations. Because the settings contain the generator type, you'll know exactly what you're getting, and so "later" might mean anything from moments later in the same MATLAB session, to years (and multiple MATLAB releases) later. You can repeat results from any point in the random number sequence at which you saved the generator settings. For example

x1 = randn(10,10); % move ahead in the random number sequence s = rng; % save the settings at this point x2 = randn(1,5)

`x2 = `*1×5*
0.8404 -0.8880 0.1001 -0.5445 0.3035

x3 = randn(5,5); % move ahead in the random number sequence rng(s); % return the generator back to the saved state x2 = randn(1,5) % repeat the same numbers

`x2 = `*1×5*
0.8404 -0.8880 0.1001 -0.5445 0.3035

Notice that while reseeding provides only a coarse reinitialization, saving and restoring the generator state using the settings structure allows you to repeat *any* part of the random number sequence.

The most common way to use a settings structure is to restore the generator state. However, because the structure contains not only the state, but also the generator type and seed, it's also a convenient way to temporarily switch generator types. For example, if you need to create values using one of the legacy generators from MATLAB 5.0, you can save the current settings at the same time that you switch to use the old generator ...

`previousSettings = rng(0,'v5uniform')`

`previousSettings = `*struct with fields:*
Type: 'twister'
Seed: 0
State: [625x1 uint32]

... and then restore the original settings later.

rng(previousSettings)

You should not modify the contents of any of the fields in a settings structure. In particular, you should not construct your own state vector, or even depend on the format of the generator state.

`rng`

allows you to either

reseed the random number generator, or

save and restore random number generator settings

without having to know what type it is. You can also return the random number generator to its default settings without having to know what those settings are. While there are situations when you might *want* to specify a generator type, `rng`

affords you the simplicity of not *having* to specify it.

If you are able to avoid specifying a generator type, your code will automatically adapt to cases where a different generator needs to be used, and will automatically benefit from improved properties in a new default random number generator type.

`rng`

In versions of MATLAB prior to 7.7, you controlled the internal state of the random number generator by calling `rand`

or `randn`

directly with the 'seed', 'state', or 'twister' inputs. For example,

`rand('state',1234)`

That syntax is not recommended, and switches MATLAB into "legacy random number mode", where `rand`

and `randn`

use separate and out of date generators, behaving as they did prior to MATLAB 7.7. If possible, you should update any existing code that uses the old syntax to use `rng`

instead. To do that, it may take some thought to determine the true intent of the old code; see Updating Your Random Number Generator Syntax in the User Guide for suggestions and examples.

If you, or some code you've run, have executed a command such as `rand('state',1234)`

that puts MATLAB into legacy mode, you can use

`rng default`

to escape from legacy mode and get back to the default startup generator. If there is code that you are not able or not permitted to modify, you can guard around that old code using:

s = rng; % save current settings of the generator % call code using legacy random number generator syntaxes rng(s) % restore previous settings of the generator

to make sure that no other code uses the legacy random number generators.

`rng`

and `RandStream`

`rng`

provides a convenient way to control random number generation in MATLAB for the most common needs. However, more complicated situations involving multiple random number streams and parallel random number generation require a more complicated tool. The `RandStream`

class is that tool, and it provides the most powerful way to control random number generation. The two tools are complementary, with `rng`

providing a much simpler and concise syntax that is built on top of the flexibility of `RandStream`

.