This is machine translation

Translated by Microsoft
Mouseover text to see original. Click the button below to return to the English version of the page.

Note: This page has been translated by MathWorks. Click here to see
To view all translated materials including this page, select Country from the country navigator on the bottom of this page.

Supported Third-Party Tools and Hardware

Third-Party Synthesis Tools and Version Support

The HDL Workflow Advisor is tested with the following third-party FPGA synthesis tools:

  • Intel® Quartus Prime Standard Edition 17.1

  • Xilinx® Vivado® Design Suite 2017.4

  • Microsemi® Libero® SoC 11.8

  • Xilinx ISE 14.7

To use third-party synthesis tools with HDL Coder™, a supported synthesis tool must be installed, and the synthesis tool executable must be on the system path. For details, see Tool Setup.

FPGA-in-the-Loop Hardware

The FPGAs supported for FPGA-in-the-loop simulation with HDL Verifier™ are listed in the HDL Verifier documentation.

You can also add custom FPGA boards using the FPGA Board Manager. See FPGA Board Customization for details.

For FPGA-in-the-Loop or Customization for USRP® Device using the HDL Workflow Advisor, a supported synthesis tool must be installed, and the synthesis tool executable must be on the system path. For details, see Tool Setup.

Simulink Real-Time FPGA I/O: Speedgoat Target Hardware

Speedgoat I/O ModuleFPGA DeviceSynthesis Tool
IO342Xilinx Kintex UltraScaleFor more information and to learn about the synthesis tool requirements, see Xilinx HDL Support with Speedgoat IO Modules.
IO333-325K, IO334, IO325Xilinx Kintex-7
IO332, IO397Xilinx Artix-7
IO332, IO331, IO331-6Xilinx Spartan-6

Generic ASIC/FPGA Hardware

The following hardware is supported for the Generic ASIC/FPGA workflow:

Synthesis ToolDevice Family
Xilinx VivadoKintex7
Artix7
Kintex UltraScale+
KintexU
Spartan7
Virtex UltraScale+
Virtex7
VirtexU
Zynq
Zynq UltraScale+
Xilinx ISEVirtex6
Virtex5
Virtex4
Spartan-3A DSP
Spartan 3E
Spartan3
Spartan6
Altera® Quartus IICyclone® III
Cyclone IV
Arria® II GX and GZ
Stratix® IV
Stratix V
Cyclone III
Arria 10
Arria V GX
MAX 10

Microsemi Libero SoC

SmartFusion2 SoC
RTG4
IGLOO2

IP Core Generation Hardware

The following hardware is supported for the IP Core Generation workflow:

Synthesis ToolTarget Platform
Xilinx VivadoZedboard and with FMC-HDMI-CAM and FMCOMMS2/3/4/
ZC706 and with FMC-HDMI-CAM and FMCOMMS2/3/4/
ZC702 with FMC-HDMI-CAM
Zynq ZC706 evaluation kit
Zynq ZC702 evaluation kit
PicoZed FMC-HDMI-CAM
Altera Quartus IIArria 10 SoC development kit
Cyclone V SoC development kit Rev. C and Rev. D
Arrow DECA Max 10 FPGA development board
Arrow SoCKit development board
Arria 10 GX FPGA development kit

FPGA Turnkey Hardware

The following hardware is supported for the FPGA Turnkey workflow:

  • Altera Arria II GX FPGA development kit

  • Altera Cyclone III FPGA development kit

  • Altera Cyclone IV GX FPGA development kit

  • Altera DE2–115 development and education board

  • XUP Atlys Spartan-6 development board

  • Xilinx Spartan-3A DSP 1800A development board

  • Xilinx Spartan-6 SP605 development board

  • Xilinx Virtex-4 ML401 development board

  • Xilinx Virtex-4 ML402 development board

  • Xilinx Virtex-5 ML506 development board

  • Xilinx Virtex-6 ML605 development board

For FPGA development boards that have more than one FPGA device, only one such device can be used with FPGA Turnkey.

Supported FPGA Device Families for Board Customization

You can also add custom FPGA boards using the FPGA Board Manager. HDL Coder supports the following FPGA device families for board customization; that is, when you create your own board definition file. See FPGA Board Customization (HDL Verifier).

Device Family
Xilinx Kintex7
Spartan-3A DSP
Spartan3
Spartan3A and Spartan3AN
Spartan3E
Spartan6
Virtex4
Virtex5
Virtex6
Virtex7
AlteraCyclone III
Cyclone IV
Arria II
Stratix IV
Stratix V

Related Topics