Device Series
Device series for the selected hardware board
Since R2022b
Model Configuration Pane: Hardware Implementation / Simulink or Embedded Coder Hardware Support Package / Hardware board settings
Description
Specify device series for the selected hardware board.
Dependencies
The Device Series parameter value options depend on the choice of Hardware board parameter value.
Settings
TC49x (default)The default device series parameter value for Infineon AURIX TC3x microcontrollers is
TC37x. You can select one of these device series:
TC33xTC36xTC37xTC38xTC39x
The default device series parameter value for Infineon AURIX TC4x microcontrollers is
TC49x. You can select one of these device series:
TC46xTC48xTC49xTC49xNTC4Dx
Tips
If you change the Device Series parameter value of a Simulink® model with peripheral blocks configured with interrupts, then you must verify the corresponding event names. In the Hardware Mapping tool, ensure that the Interrupt name parameter value of the Hardware Interrupt block matches the corresponding event name parameter values of the peripheral blocks.
Recommended Settings
| Application | Setting |
|---|---|
| Debugging | No impact |
| Traceability | No impact |
| Efficiency | No impact |
| Safety precaution | No impact |
Programmatic Use
| No programmatic use is available. |
Version History
Introduced in R2022b
