Standards-Based Modeling

Track planes by processing automatic dependent surveillance-broadcast (ADS-B) signals. You can use previously captured signals or receive signals in real time using an RTL-SDR radio, ADALM-PLUTO radio or USRP™ radio. You can also visualize the tracked planes on a map using Mapping Toolbox™.

Track planes by processing automatic dependent surveillance-broadcast (ADS-B) signals. You can use previously captured signals, or receive signals in real time using an RTL-SDR radio, an ADALM-PLUTO radio or a USRP™ radio. You can also visualize the tracked planes on a map with Mapping Toolbox™.

Track ships by processing automatic identification system (AIS) signals. You can use previously captured signals or receive signals in real time using an RTL-SDR radio, an ADALM-PLUTO radio or a USRP™ Radio. You can also show the tracked ships on a map using the Mapping Toolbox™.

Build an FM mono or stereo receiver. You can either use recorded data from a file, or receive signals in real time using the RTL-SDR Radio, ADALM-PLUTO Radio, or USRP™ Radio.

Build an FM mono or stereo receiver. You can either use previously captured signals, or receive signals in real time using the RTL-SDR, ADALM-PLUTO or USRP™ radio.

Implement a walkie-talkie receiver using Simulink® and Communications Toolbox™. The specific radio standard that this example follows is FRS/GMRS (Family Radio Service / General Mobile Radio Service) with CTCSS (Continuous Tone-Coded Squelch System). You can use simulated signals, captured signals, or received signals from a commercial walkie-talkie using the Communications Toolbox Support Package for RTL-SDR Radio.

Build a walkie-talkie receiver using MATLAB® and Communications Toolbox™. The specific radio standard this example follows is FRS/GMRS (Family Radio Service / General Mobile Radio Service) with CTCSS (Continuous Tone-Coded Squelch System). You can use simulated signals, captured signals, or received signals from a commercial walkie-talkie using the Communications Toolbox Support Package for RTL-SDR Radio.

Use Communications Toolbox™ to read utility meters by processing Standard Consumption Message (SCM) signals and Interval Data Message (IDM) signals which are emitted by Encoder-Receiver-Transmitter (ERT) compatible meters. You can either use recorded data from a file, or receive over-the-air signals in real time using an RTL-SDR or ADALM-PLUTO radio.

Use Simulink® and Communications Toolbox™ to read utility meters by processing Standard Consumption Message (SCM) or Interval Data Message (IDM) signals emitted by meters. You can either use recorded data from a file, or receive over-the-air signals in real time using the RTL-SDR Radio or ADALM-PLUTO Radio.

Extract program or song information from FM radio stations using the RDS or RBDS standard and, optionally, the RadioText Plus (RT+) standard. You can use a previously captured signal, or receive signals over-the-air in real time using an RTL-SDR radio, an ADALM-PLUTO radio, or a USRP™ radio.

Extract program or song information from FM radio stations using the RDS or RBDS standard and, optionally, the RadioText Plus (RT+) standard. You can use a previously captured signal, or receive signals over-the-air in real time using an RTL-SDR radio, an ADALM-PLUTO radio, or a USRP™ radio.